Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
  1. Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Insect the fuses and relays related to this system before inspecting the suspected areas below.


Cruise control system 
Symptom
Suspected area
See page
ON-OFF button cannot be pushed on (CRUISE main indicator light on combination meter does not come on)
1. Cruise control switch circuit
Click here
2. Cruise main indicator light circuit
Click here
3. Combination meter
-
4. Hybrid vehicle control ECU
-
Vehicle speed cannot be set (indicator light on combination meter comes on when ON-OFF button is pushed on, but it goes off when vehicle speed is set)
1. Cruise control switch circuit
Click here
2. Hybrid vehicle control ECU
-
Setting cannot be done (indicator light on combination meter come on when ON-OFF button is pushed on, and it remains on while setting)
1. Cruise control switch circuit
Click here
2. Stop light switch circuit
Click here
3. Shift position sensor circuit
Click here
4. Combination meter
-
5. Hybrid vehicle control ECU
-
Cruise control is canceled while driving (CRUISE main indicator light remains on)
1. Cruise control switch circuit
Click here
2. Vehicle speed sensor circuit
Click here
3. Stop light switch circuit
Click here
4. Cruise main indicator light circuit
Click here
5. Hybrid vehicle control ECU
-
Hunting occurs (speed is not constant)
1. Vehicle speed sensor circuit
Click here
2. Hybrid vehicle control ECU
-
Setting cannot be canceled (when functions such as COAST, ACCEL, RESUME, set speed change are operated with control switch)
1. Cruise control switch circuit
Click here
2. Hybrid vehicle control ECU
-