Home › General › MAINTENANCE › BRAKE
RM2170E _V1 General _057002 MAINTENANCE _0277906 BRAKE N

MAINTENANCE  BRAKE  GENERAL MAINTENANCE  


PROCEDURE

Hide 1.INSPECT BRAKE LINE PIPES AND HOSES

HINT:

Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.


P009958

a.

Using a mirror, check the entire circumference and length of the brake lines and hoses for:

·

Damage

·

Wear

·

Deformation

·

Cracks

·

Kinks

·

Corrosion

·

Leaks

·

Twists



b.

Check all the clamps for tightness and check the connections for leakage.


c.

Check that the hoses and lines are not near sharp edges, moving parts or the exhaust system.


d.

Check that the lines are installed properly and pass through the center of the grommets.


Hide 2.INSPECT BRAKE PEDAL

a.

Check the brake pedal.

Type See procedures
LHD (Click here)
RHD (Click here)


Hide 3.INSPECT PARKING BRAKE

a.

Check the parking brake shoe clearance and parking brake lever travel (See page Brake>PARKING BRAKE>PARKING BRAKE SYSTEM>ADJUSTMENT).


b.

Check the parking brake cables to ensure that they are not deformed or binding.


Hide 4.INSPECT FRONT BRAKE

a.

Check the front brake pads and discs (See page Brake>BRAKE (FRONT)>FRONT BRAKE>INSPECTION).


Hide 5.INSPECT BRAKE LININGS AND DRUMS

a.

Check the brake linings and drums (See page Brake>BRAKE (REAR)>REAR BRAKE>INSPECTION).


Hide 6.INSPECT OR CHANGE BRAKE FLUID

a.

Inspect or change the brake fluid (See page Brake>BRAKE SYSTEM (OTHER)>BRAKE FLUID>ON-VEHICLE INSPECTION).

Fluid:

SAE J1703 or FMVSS No. 116 DOT3