Home › Engine / Hybrid System › 1NZ-FXE (COOLING) › RADIATOR › 2011.12–2014.12
RM2170E _51 Engine / Hybrid System _057009 1NZ-FXE COOLING _0277978 RADIATOR A

1NZ-FXE COOLING  RADIATOR  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 3.DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 51442C 4.REMOVE ENGINE UNDER COVER LH

Hide 51441C 5.REMOVE ENGINE UNDER COVER RH

Hide 17705 10.REMOVE AIR CLEANER CAP SUB-ASSEMBLY

Hide 16571C 13.DISCONNECT NO. 1 RADIATOR HOSE

a.
A267976

Disconnect the reserve tank hose.


b.
A267977

Disconnect the No. 1 radiator hose.


Hide 16572D 14.DISCONNECT NO. 2 RADIATOR HOSE

a.
A267978

Disconnect the No. 2 radiator hose.


Hide G922F 15.DISCONNECT OUTLET NO. 1 HYBRID WATER PUMP HOSE

a.
A267970

Disconnect the 3 clamps and outlet No. 1 hybrid water pump hose.


Hide G90A0A 16.DISCONNECT NO. 1 INVERTER COOLING HOSE ASSEMBLY

a.
A268814

Disconnect the 3 clamps and No. 1 inverter cooling hose assembly.


Hide 53205 17.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY

a.
A267973

Disconnect the horn connector.


b.
A267972

Disconnect the 3 clamps and cooling fan ECU connector.


c.
A280343E01
0.126,0 0.445,0.249 0.319,0.249 10 *A 0.126,2.143 0.445,2.392 0.319,0.249 10 *B

Disconnect the clamp of hood lock control cable.

Text in Illustration
*A for LHD
*B for RHD


d.
A267979

Remove the 5 bolts and upper radiator support sub-assembly.


e.

Remove the 2 radiator support cushions.


Hide 16712 18.REMOVE NO. 2 FAN SHROUD

a.
A248164

Remove the 2 bolts, 2 claws and No. 2 fan shroud.


Hide 16400 19.REMOVE RADIATOR ASSEMBLY

a.
A267981

Remove the radiator assembly with the fan shroud.

NOTICE:

Do not apply any excessive force to the cooler condenser assembly or pipe when removing the radiator assembly.



b.

Remove the 2 lower radiator supports.


c.
A268836

Remove the 2 bolts and No. 3 radiator hose.


d.
A267982

Remove the 2 claws and radiator assembly.