Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER › 2014.12–2017.06
RM2170E _58 Vehicle Interior _057042 HEATING / AIR CONDITIONING _0278133 CONDENSER A

HEATING / AIR CONDITIONING  CONDENSER  INSTALLATION  


PROCEDURE

Hide 88467 1.INSTALL NO. 1 COOLER CONDENSER CUSHION

a.

Install the 4 No. 1 cooler condenser cushions to the cooler condenser assembly.


Hide 88460 2.INSTALL COOLER CONDENSER ASSEMBLY

a.

Engage the 2 guides to install the cooler condenser assembly.

NOTICE:

Do not damage the condenser or radiator when installing the cooler condenser assembly.


HINT:

If a new cooler condenser assembly is installed, add compressor oil to the condenser as follows.


Capacity:

Add 40 cc (1.35 fl. oz.)


Compressor oil:

ND-OIL 11 or equivalent.



Hide 88706 3.CONNECT LIQUID PIPE SUB-ASSEMBLY

a.

Remove the attached vinyl tape from the liquid pipe sub-assembly and the connecting part of the cooler condenser assembly.


b.

Apply sufficient compressor oil to a new O-ring and the fitting surface of the pipe joint.

Compressor oil:

ND-OIL 11 or equivalent.



c.

Install the O-ring onto the liquid pipe sub-assembly.


d.

Install the liquid pipe sub-assembly onto the cooler condenser assembly with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 88711 4.CONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

a.

Remove the attached vinyl tape from the No. 1 cooler refrigerant discharge hose and the connecting part of the cooler condenser assembly.


b.

Apply sufficient compressor oil to a new O-ring and the fitting surface of the hose joint.

Compressor oil:

ND-OIL 11 or equivalent.



c.

Install the O-ring onto the No. 1 cooler refrigerant discharge hose.


d.

Install the No. 1 cooler refrigerant discharge hose onto the cooler condenser assembly with the bolt.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


Hide 53205 6.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

Hide 53208A 7.INSTALL HOOD LOCK SUPPORT SUB-ASSEMBLY

a.

Install the hood lock support sub-assembly with the 2 bolts.

Torque:
13 N*m (127 kgf*cm, 9 ft.*lbf)


b.

Connect the connector.


Hide 53301 18.ADJUST HOOD SUB-ASSEMBLY

Hide 19.CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT