1.RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM
2.REMOVE FRONT BUMPER ASSEMBLY
53289A
3.REMOVE RADIATOR SUPPORT OPENING COVER
53286B
4.REMOVE NO. 2 RADIATOR SIDE AIR SEAL
53285B
5.REMOVE NO. 1 RADIATOR SIDE AIR SEAL
53288B
6.REMOVE RADIATOR SUPPORT EXTENSION LH
53287B
7.REMOVE RADIATOR SUPPORT EXTENSION RH
52611
8.REMOVE FRONT BUMPER ENERGY ABSORBER
52131A
9.REMOVE FRONT BUMPER REINFORCEMENT
53510
10.REMOVE HOOD LOCK ASSEMBLY
53208A
11.REMOVE HOOD LOCK SUPPORT SUB-ASSEMBLY
Disconnect the connector.
Remove the 2 bolts and hood lock support sub-assembly.
53205
12.REMOVE UPPER RADIATOR SUPPORT SUB-ASSEMBLY
16712
13.REMOVE NO. 2 FAN SHROUD
88711
14.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88706
15.DISCONNECT LIQUID PIPE SUB-ASSEMBLY
Remove the bolt and disconnect the liquid pipe sub-assembly from the cooler condenser assembly.
Remove the O-ring from the liquid pipe sub-assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent the entry of moisture and foreign matter.
88460
16.REMOVE COOLER CONDENSER ASSEMBLY
Disengage the 2 guides and remove the cooler condenser assembly as shown in the illustration.
Do not damage the condenser or radiator when removing the cooler condenser assembly.
88467
17.REMOVE NO. 1 COOLER CONDENSER CUSHION
Remove the 4 No. 1 cooler condenser cushions from the cooler condenser assembly.