| ECM
|
Vehicle Identification Number (VIN) or frame number registration
|
MIL comes on
|
( )(w/o Canister Pump Module)
( )(w/ Canister Pump Module)
|
·
Throttle body with motor assembly
·
Cylinder head sub-assembly
·
Camshaft (for intake or exhaust camshaft)
·
Camshaft timing gear assembly
·
Mass air flow meter sub-assembly
·
Fuel pump with filter assembly
·
Engine coolant temperature sensor
|
Inspection after repair
|
Poor idle, engine starting, etc
|
( )(w/o Canister Pump Module)
|
·
Throttle body with motor assembly
·
Cylinder head sub-assembly
·
Camshaft (for intake or exhaust camshaft)
·
Camshaft timing gear assembly
·
Mass air flow meter sub-assembly
·
Fuel pump with filter assembly
·
Engine coolant temperature sensor
|
Inspection after repair
|
Poor idle, engine starting, etc
|
( )(w/ Canister Pump Module)
|
| Service plug grip
|
Perform high voltage fuse accumulated load history reset
|
DTCs are stored
|
( )
|
·
Door control and tire pressure monitoring system receiver assembly
·
Tire pressure warning valve and transmitter
|
·
Transmitter ID registration
|
·
When DTC detection conditions of "transmitter ID not received" DTC are met, TPWS indicator blinks for 1 minute, and then illuminates.
·
Tire pressure warning function
|
( )for Registration
( )for Initialization
|
| Brake booster with master cylinder assembly
|
·
Initialization and calibration of the linear solenoid valve
·
Yaw rate and acceleration sensor zero point calibration
|
·
ABS warning light illumination
·
Brake warning light/yellow (minor malfunction) illumination
·
Slip indicator light illumination
·
VSC disable or malfunctioning
|
( ) for Initialization
( ) for Calibration
|
·
Brake pedal stroke sensor assembly
|
·
Clearing stored linear solenoid valve calibration data
·
Initialization and calibration of the linear solenoid valve
|
( )
|
| Yaw rate and acceleration sensor (air bag sensor assembly)
|
·
Clearing zero point calibration data
·
Yaw rate and acceleration sensor zero point calibration
|
( )
|
| Power steering ECU assembly
|
·
Torque sensor zero point calibration
|
·
P/S warning light comes on
|
( )
|
| Electric power steering column sub-assembly
|
Torque sensor zero point calibration
|
Steering effort is different between turning steering wheel to left and right
|
·
Certification ECU (smart key ECU assembly)
·
Steering lock ECU (steering lock actuator assembly)
·
ID code box (immobiliser code ECU)
·
Hybrid vehicle control ECU
·
Electrical key transmitter sub-assembly
|
Code registration (Engine immobiliser system)
|
·
Wireless door lock control system
·
Smart entry and start system
·
Hybrid control system start
|
See Service Bulletin for the registration method
|
|
Zero point calibration and sensitivity check. (Occupant classification system)
|
·
Occupant classification system
·
Passenger airbag ON/OFF indicator
·
Airbag system (Front passenger side)
·
Seat belt warning system (Front passenger)
|
( )
|
·
No. 1 air conditioning radiator damper servo sub-assembly
·
No. 2 air conditioning radiator damper servo sub-assembly
·
No. 1 blower damper servo sub-assembly
|
Initialization servo motor (Air conditioning system)
|
DTCs are output
|
( )
|
·
Door window regulator assembly
·
Power window regulator motor assembly
|
Initialize power window control system
|
·
Catch protection function
·
Operation function after power switch is turned off
|
( )
|
·
Headlight leveling ECU assembly
·
Rear height control sensor sub-assembly
|
Perform headlight leveling ECU initialization
|
Automatic headlight beam level control function
|
( )
|