86520
1.INSTALL LOW PITCHED HORN ASSEMBLY
| *A | Type A |
| *B | Type B |
Install the low pitched horn assembly with the bolt.
There are two types of bolts and the tightening torque depends on the type of bolt used as shown in the illustration. Therefore, confirm the tightening torque before installing the bolt.
Connect the connector.
53289A
2.INSTALL RADIATOR SUPPORT OPENING COVER
w/o Wheel Opening Moulding:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(w/o Wheel Opening Moulding)>REASSEMBLY
w/ Wheel Opening Moulding:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(w/ Wheel Opening Moulding)>REASSEMBLY
3.INSTALL FRONT BUMPER ASSEMBLY
w/o Wheel Opening Moulding:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(w/o Wheel Opening Moulding)>INSTALLATION
w/ Wheel Opening Moulding:
Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER(w/ Wheel Opening Moulding)>INSTALLATION