Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › 2015.08–2016.05
RM2070E _51 Engine / Hybrid System _061914 CRUISE CONTROL _0301643 LANE DEPARTURE ALERT SYSTEM T

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Lane Departure Alert System
Symptom Suspected Area See page
Lane departure alert system does not operate Lane departure warning camera power source circuit (Click here)
Main switch circuit (Click here)
CAN communication system (Click here)
Lane departure warning camera (Click here)
Lane departure alert indicator abnormal (Does not turn on) Lane departure alert indicator circuit (Click here)
Main switch circuit (Click here)
CAN communication system (Click here)
Combination meter sub-assembly (Click here)
Lane departure warning camera (Click here)
Lane departure alert indicator abnormal (Remains on) Lane departure alert indicator circuit (Click here)
Main switch circuit (Click here)
CAN communication system (Click here)
Combination meter sub-assembly (Click here)
Lane departure warning camera (Click here)
Lane departure alert system is not canceled even when turn signal light switch is operated Turn signal switch circuit (Click here)
Lane departure warning camera (Click here)
Increase in cases that driver can see lane markers but system cannot detect line markers Windshield glass is dirty -
Lane departure warning camera is dirty -
Headlight assemblies are dirty or worn -
Adjustment of lane departure warning camera (Click here)
Lane departure warning camera (Click here)
Lane departure alert system is operating, but no operation condition is displayed on multi-information display in combination meter sub-assembly Combination meter sub-assembly (Click here)
Lane departure warning camera (Click here)
Buzzer does not sound even when lane markers are lost while lane departure warning function is operating Combination meter sub-assembly (Click here)
Lane departure warning camera (Click here)