TRC OFF Indicator Light does not Come ON
Circuit diagnosis · Vehicles built from Aug 2008
DESCRIPTION
The skid control ECU is connected to the combination meter via the CAN communication system.WIRING DIAGRAM
Refer to TRC OFF indicator light circuit (Click here).INSPECTION PROCEDURE
- NOTICE:
- When replacing the brake actuator assembly, perform zero point calibration (Click here).
| 1. CHECK CAN COMMUNICATION SYSTEM |
Check if a CAN communication system DTC is output (Click here).
- Result:
Result
Proceed to
DTC is not output.
A
DTC is output.
B
|
|
||||
| A | |
| 2. INSPECT COMBINATION METER ASSEMBLY |
Inspect the combination meter (Click here).
|
|
||||
| OK | ||
| ||
