Home › SECURITIES › ENGINE IMMOBILISER › ENGINE IMMOBILISER SYSTEM (w/ Entry and Start System)

ENGINE IMMOBILISER SYSTEM (w/ Entry and Start System) > DIAGNOSTIC TROUBLE CODE CHART

for Preparation Click here



CERTIFICATION ECU DTC CHART

Certification ECU 
DTC Code
Detection Item
Trouble Area
See page
B2784
Antenna Coil Open / Short
- Engine switch
- ECU aggregation box (certification ECU)
Click here
B2785
Communication Malfunction between ECUs Connected by LIN
- Wire harness
- ECU aggregation box (certification ECU)
- Instrument panel junction block (main body ECU)
- Steering lock actuator (steering lock ECU)
- ID code box
Click here
B2789
No Response from ID BOX
- Wire harness
- ECU aggregation box (certification ECU)
- ID code box
Click here
B278A
Short to GND in Immobiliser System Power Source Circuit
- Wire harness
- Engine switch
- ECU aggregation box (certification ECU)
Click here
B2790
ID BOX EEPROM Malfunction
ID code box
Click here
B2791
Communication Condition Failure between ECM
- Wire harness
- ECU aggregation box (certification ECU)
- Instrument panel junction block (main body ECU)
- Steering lock actuator (steering lock ECU)
- ID code box
- ECM
Click here

ECM DTC CHART

HINT:
The DTCs for the engine immobiliser system are specified above. If other codes are output, check the DTC chart for the engine control system.


ECM 
DTC Code
Detection Item
Trouble Area
See page
B2799
Engine Immobiliser System Malfunction
- Wire harness
- ID code box
- ECM
Click here
B279A
Theft Deterrent System Communication Line High Fixation
- Wire harness
- ID code box
- ECM
Click here
B279C
Theft Deterrent System Presence Detection
ECM
Click here