51441
1.REMOVE NO. 1 ENGINE UNDER COVER (for 3ZR-FAE)
51441
2.REMOVE NO. 1 ENGINE UNDER COVER (for 2AR-FE, 3ZR-FE)
51444C
3.REMOVE REAR ENGINE UNDER COVER LH
74414B
4.REMOVE BATTERY BRACKET REINFORCEMENT
for 2AR-FE for 1.6 kW Type: Click hereEngine / Hybrid System>2AR-FE STARTING>STARTER(for 1.6 kW Type)>REMOVAL
for 2AR-FE for 1.7 kW Type: Click hereEngine / Hybrid System>2AR-FE STARTING>STARTER(for 1.7 kW Type)>REMOVAL
for 3ZR-FAE: Click hereEngine / Hybrid System>3ZR-FAE STARTING>STARTER>REMOVAL
for 3ZR-FE for 1.0 kW Type: Click hereEngine / Hybrid System>3ZR-FE STARTING>STARTER(for 1.0 kW Type)>REMOVAL
for 3ZR-FE for 1.3 kW Type: Click hereEngine / Hybrid System>3ZR-FE STARTING>STARTER(for 1.3 kW Type)>REMOVAL
31490
5.REMOVE CLUTCH ACCUMULATOR ASSEMBLY
Using a 10 mm union nut wrench, disconnect the accumulator to flexible hose tube from the clutch hose.
Use a container to collect the fluid.
Remove the clip and clutch hose from the clutch accumulator assembly.
Using a 10 mm union nut wrench, loosen the bleeder to accumulator tube labeled A and accumulator to flexible hose tube labeled B.
Remove the bolt, clamp, bleeder to accumulator tube and accumulator to flexible hose tube.
| *A | for 2AR-FE |
| *B | for 3ZR-FE, 3ZR-FAE |
| *1 | Engine Wire |
for 2AR-FE:
Remove the 3 bolts and clutch accumulator assembly from the manual transaxle assembly.
for 3ZR-FE, 3ZR-FAE:
Remove the 3 bolts, engine wire and clutch accumulator assembly from the manual transaxle assembly.