Home › Drivetrain › CLUTCH › CLUTCH ACCUMULATOR(for Gasoline) › 2013.11–2015.10
RM3090E _52 Drivetrain _008754 CLUTCH _0050761 CLUTCH ACCUMULATOR(for Gasoline) A

CLUTCH  CLUTCH ACCUMULATOR(for Gasoline)  REMOVAL  


PROCEDURE

Hide 51441 1.REMOVE NO. 1 ENGINE UNDER COVER (for 3ZR-FAE)

Hide 51441 2.REMOVE NO. 1 ENGINE UNDER COVER (for 2AR-FE, 3ZR-FE)

Hide 51444C 3.REMOVE REAR ENGINE UNDER COVER LH

Hide 74414B 4.REMOVE BATTERY BRACKET REINFORCEMENT

Hide 31490 5.REMOVE CLUTCH ACCUMULATOR ASSEMBLY

a.
C277990

Using a 10 mm union nut wrench, disconnect the accumulator to flexible hose tube from the clutch hose.

HINT:

Use a container to collect the fluid.



b.

Remove the clip and clutch hose from the clutch accumulator assembly.


c.
C277988N01
0.375,0.344 0.531,0.542 0.156,0.198 10 A 2.604,0.76 2.76,0.958 0.156,0.198 10 A 2.625,1.177 2.781,1.375 0.156,0.198 10 B

Using a 10 mm union nut wrench, loosen the bleeder to accumulator tube labeled A and accumulator to flexible hose tube labeled B.


d.

Remove the bolt, clamp, bleeder to accumulator tube and accumulator to flexible hose tube.


e.
C298599

Remove the 3 bolts and clutch accumulator assembly from the manual transaxle assembly.