Home › Drivetrain › EG62F (MANUAL TRANSMISSION / TRANSAXLE) › TRANSMISSION CONTROL CABLE
RM3620E _52 Drivetrain _076271 EG62F MANUAL TRANSMISSION / TRANSAXLE _0372427 TRANSMISSION CONTROL CABLE A

EG62F MANUAL TRANSMISSION / TRANSAXLE  TRANSMISSION CONTROL CABLE  INSTALLATION  


PROCEDURE

Hide 33820B 1.INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY

a.

Pass the transmission control cable assembly into the vehicle and install the transmission control cable assembly to the vehicle body with the 2 nuts.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)


b.
C403011C01
1.583,1.917 1.75,1.917 1.75,1.917 2.083,1.635 true 1.375,1.833 1.542,2 0.167,0.167 10 true *a
*a Align the hole on the transmission control cable bracket with the protrusion of the vehicle body.


Connect the transmission control cable assembly to the vehicle body with the nut.

Torque:
6.0 N*m (61 kgf*cm, 53 in.*lbf)

NOTICE:

Do not deform the transmission control cable bracket.



c.
C406613N01
0.75,1.417 0.917,1.583 0.167,0.167 10 true A 0.667,0.667 0.833,0.833 0.167,0.167 10 true A 1.292,0.094 1.458,0.26 0.167,0.167 10 true B 2.667,0.833 2.833,1 0.167,0.167 10 true B

Connect the 2 transaxle control cables to the control cable bracket with 2 new clips labeled A.


d.

Connect the 2 transaxle control cables to the manual transaxle assembly and install the new 2 clips labeled B.


Hide 33820B 2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

Hide 33820B 3.ADJUST TRANSMISSION CONTROL CABLE ASSEMBLY

Hide 58810J 5.INSTALL CONSOLE BOX ASSEMBLY

Hide 58152A 6.INSTALL FRONT LOWER NO. 1 FLOOR HEAT INSULATOR

a.

Install the front lower No. 1 floor heat insulator to the vehicle body with the 3 nuts.

Torque:
4.9 N*m (50 kgf*cm, 43 in.*lbf)


Hide 58165C 7.INSTALL FRONT FLOOR COVER RH (w/ Cover)

Hide 58166A 8.INSTALL FRONT FLOOR COVER LH (w/ Cover)

Hide 17410 9.INSTALL FRONT EXHAUST PIPE ASSEMBLY

Hide 51420 10.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 51441 11.INSTALL NO. 1 ENGINE UNDER COVER

Hide 53895B 12.INSTALL FRONT FENDER FRONT SPLASH SHIELD RH

Hide 53896B 13.INSTALL FRONT FENDER FRONT SPLASH SHIELD LH

Hide 74404B 14.INSTALL BATTERY CLAMP SUB-ASSEMBLY