Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL(for RHD with Vacuum Brake Booster)
RM3620E _54 Brake _076411 BRAKE SYSTEM (OTHER) _0377035 BRAKE PEDAL(for RHD with Vacuum Brake Booster) A

BRAKE SYSTEM (OTHER)  BRAKE PEDAL(for RHD with Vacuum Brake Booster)  INSTALLATION  


PROCEDURE

Hide 47121 1.INSTALL BRAKE PEDAL PAD

a.

Install the brake pedal pad to the brake pedal support assembly.


Hide 2.INSTALL BRAKE PEDAL SUPPORT ASSEMBLY

a.
C406478

Install the brake pedal support assembly with the 4 nuts.

Torque:
12.7 N*m (130 kgf*cm, 9 ft.*lbf)


b.
C406476

Install the 2 clips.


Hide 47264A 3.INSTALL PUSH ROD PIN

a.
C319792C03
0,0 0,0 false
V100144

Lithium Soap Base Glycol Grease


Apply lithium soap base glycol grease to the push rod pin.


b.
C406474

Connect the brake master cylinder push rod clevis to the brake pedal support assembly with the push rod pin, and install a new clip as shown in the illustration.

NOTICE:

Be sure to install the push rod pin in the correct direction.



Hide 47101A 5.INSTALL BRAKE PEDAL RETURN SPRING

a.
C406472

Install the brake pedal return spring to the brake pedal support assembly as shown in the illustration.


Hide 47110 6.CONNECT BRAKE PEDAL SUPPORT ASSEMBLY

a.
C406468

Connect the brake pedal support assembly to the instrument panel reinforcement assembly with the bolt.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)


b.
C406470

Connect the connector.


c.

Connect the 2 wire harness clamps to the brake pedal support assembly.


Hide 84345 7.INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

Hide 84340 8.INSTALL STOP LIGHT SWITCH ASSEMBLY

Hide 87211A 9.INSTALL NO. 2 AIR DUCT

Hide 73900 10.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY