| Cannot enter EV drive mode
|
CAN communication system
|
|
| Pattern select switch EV mode circuit
|
|
| EV mode switch (Integration control and panel assembly)
|
|
| Combination meter assembly
|
|
| EV mode indicator light does not illuminate
|
Combination meter assembly
|
|
| EV mode switch (Integration control and panel assembly)
|
|
| Pattern select switch EV mode circuit
|
|
| EV mode indicator light does not turn off
|
Combination meter assembly
|
|
| EV mode switch (Integration control and panel assembly)
|
|
| Pattern select switch EV mode circuit
|
|
| Cannot enter ECO mode
|
CAN communication system
|
|
| ECO mode switch (Integration control and panel assembly)
|
|
| Pattern select switch ECO mode circuit
|
|
| Combination meter assembly
|
|
| ECO mode indicator light does not illuminate
|
ECO mode switch (Integration control and panel assembly)
|
|
| Pattern select switch ECO mode circuit
|
|
| Combination meter assembly
|
|
| ECO mode indicator light does not turn off
|
ECO mode switch (Integration control and panel assembly)
|
|
| Pattern select switch ECO mode circuit
|
|
| Combination meter assembly
|
|
| Cannot enter SPORT mode
|
CAN communication system
|
|
| SPORT mode switch (Integration control and panel assembly)
|
|
| Pattern select switch SPORT mode circuit
|
|
| Combination meter assembly
|
|
| SPORT mode indicator light does not illuminate
|
SPORT mode switch (Integration control and panel assembly)
|
|
| Pattern select switch SPORT mode circuit
|
|
| Combination meter assembly
|
|
| SPORT mode indicator light does not turn off
|
SPORT mode switch (Integration control and panel assembly)
|
|
| Pattern select switch SPORT mode circuit
|
|
| Combination meter assembly
|
|
| Cannot enter TRAIL mode
|
CAN communication system
|
|
| TRAIL mode switch (Integration control and panel assembly)
|
|
| TRAIL switch circuit
|
|
| Combination meter assembly
|
|
| TRAIL indicator does not illuminate
|
TRAIL mode switch (Integration control and panel assembly)
|
|
| TRAIL switch circuit
|
|
| Combination meter assembly
|
|
| TRAIL indicator does not turn off
|
TRAIL mode switch (Integration control and panel assembly)
|
|
| TRAIL switch circuit
|
|
| Combination meter assembly
|
|
| Hunting (Poor idle)
|
Check for Diagnosis Related Information*3
|
|
| Drive Start Control
|
|
| Hesitation and/or poor acceleration
|
Check for Diagnosis Related Information*3
|
|
| Brake override system
|
|
| Drive Start Control
|
|
| Shift range position cannot be changed by shifting to "+" or "-"
|
Transmission control switch circuit
|
|
| Shift position indicator is malfunctioning
|
Indicator circuit
|
|
| Power switch does not turn on (READY)
|
Check vehicle control history (wrong assembly confirmation)*1
|
|
| Entry and start system (for start function)
|
|
| ECU power source circuit (Hybrid control system)
|
|
| Hybrid vehicle control ECU assembly
|
|
| ECM
|
(for A25A-FXS)
(for A25B-FXS)
|
| Loud rattle from hybrid vehicle transaxle
|
"Exhaust Filter Full" is displayed on the multi-information display
|
|
| Check idle learning
|
(for A25A-FXS, w/ Canister Pump Module)
(for A25A-FXS, w/o Canister Pump Module)
(for A25B-FXS)
|
| Transmission input damper assembly
|
(for A25A-FXS)
(for A25B-FXS)
|
| Hybrid vehicle transaxle assembly
|
|
| Engine misfire
|
-
|
| "Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display.*2
|
1. Make sure the HV battery cooling system intake port is not blocked.
|
-
|
| 2. Make sure there are no gaps between the connecting parts of the ducts.
|
-
|
3. Clean the No. 1 hybrid battery intake filter.
Check for entry of foreign matter.
|
|
| 4. Clear the DTCs to reset the learning values even if no DTCs are stored.
|
|
| Abnormal sound is heard from the area around the No. 1 hybrid battery intake duct.
|
1. Make sure the HV battery cooling system intake port is not blocked.
|
-
|
| 2. Make sure there are no gaps between the connecting parts of the ducts.
|
-
|
3. Clean the No. 1 hybrid battery intake filter.
Check for entry of foreign matter.
|
|
| 4. Clear the DTCs to reset the learning values even if no DTCs are stored.
|
|
| Engine stops and starts less frequently.
|
Check vehicle control history
(Limit to Charge / Discharge Control Value by Hybrid Battery Temperature High)
|
|
| Engine speed returns to idle slowly after accelerator pedal is fully released.
|
Check vehicle control history
(Limit to Charge / Discharge Control Value by Hybrid Battery Temperature High)
|
|