Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA › from 2019.02
RM3620E _56 Audio / Visual / Telematics _076048 NAVIGATION / MULTI INFO DISPLAY _0370119 NAVIGATION ANTENNA A

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION ANTENNA  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 86862 1.INSTALL NAVIGATION ANTENNA BRACKET

Hide 86860 2.INSTALL NAVIGATION ANTENNA ASSEMBLY

a.
E394636C01
0,0 0,0 false
V113147

Install in this Direction


Attach the guide and claw to install the navigation antenna assembly as shown in the illustration.


Hide 3.INSTALL NAVIGATION ANTENNA ASSEMBLY WITH BRACKET

a.
E394632N01
0.375,1.479 0.563,1.677 0.188,0.198 10 true (1) 2.896,1.531 3.094,1.729 0.198,0.198 10 true (2)

Attach the guide to set the navigation antenna assembly with bracket.


b.

Install the 2 screws in the order shown in the illustration.


c.
E394631

Attach the claw.


d.

Connect the connector.


Hide 55950G 4.INSTALL DEFROSTER NOZZLE ASSEMBLY

Hide 5.INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY

Hide 6.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 65351A 7.INSTALL BATTERY HOLE COVER (for HV Model)

Hide 58416K 8.INSTALL REAR NO. 2 FLOOR BOARD (for HV Model)

Hide 58410B 9.INSTALL DECK BOARD ASSEMBLY (for HV Model)

Hide 12.PERFORM SYSTEM INITIALIZATION AND CALIBRATION