Home › Engine / Hybrid System › A25B-FXS (COOLING) › RADIATOR › from 2020.08
RM3620E _51 Engine / Hybrid System _080121 A25B-FXS COOLING _0389726 RADIATOR A

A25B-FXS COOLING  RADIATOR  INSTALLATION  


PROCEDURE

Hide 16535 1.INSTALL LOWER RADIATOR SUPPORT

a.

Install the 2 lower radiator supports to the radiator assembly.


Hide 16523A 2.INSTALL RADIATOR SUPPORT CUSHION

a.

Install the 2 radiator support cushions to the radiator assembly.


Hide 16400 3.INSTALL RADIATOR ASSEMBLY

a.

Attach the 2 guides.


b.

Attach the 2 claws to install the fan with motor assembly to the radiator assembly.

NOTICE:

Do not damage the radiator assembly when installing the fan with motor assembly.



c.

Install the radiator assembly with the fan with motor assembly to the vehicle body.

NOTICE:

Do not apply excessive force to the cooler condenser assembly with the radiator assembly (for Inverter Coolant) or pipe and hose when installing the radiator assembly with the fan with motor assembly.



d.

Attach the 2 guides.


e.

Attach the 2 claws to install the cooler condenser assembly with the radiator assembly (for Inverter Coolant) to the radiator assembly.

NOTICE:

Make sure not to damage the cooler condenser assembly with the radiator assembly (for Inverter Coolant) when installing the cooler condenser assembly with the radiator assembly (for Inverter Coolant).



f.

for Integration Type:

i.
A435715C01
1,0.448 1.167,0.208 1.167,0.208 1.344,0.208 false 1.406,0.125 1.719,0.281 0.313,0.156 10 false *a
*a Lock Lever


Attach the 2 wire harness clamps.


ii.

Connect the cooling fan motor connector and push down the lock lever to attach the claw as shown in the illustration.

NOTICE:
·

When connecting the cooling fan motor connector, make sure that the connecting parts of the cooling fan motor connector are free of dirt, water or other foreign matter.

·

Be sure to securely connect the cooling fan motor connector.





g.

for Non-integration Type:

i.
A435718

Attach the 2 wire harness clamps.


ii.

Connect the cooling fan motor connector and rotate the lever to lock it.

NOTICE:
·

When connecting the cooling fan motor connector, make sure that the connecting parts of the cooling fan motor connector are free of dirt, water or other foreign matter.

·

Be sure to securely connect the cooling fan motor connector.




iii.

Connect the cooling fan motor connector and attach the wire harness clamp.



Hide G9228A 4.CONNECT INVERTER COOLING HOSE

a.

Attach the clamp to connect the No. 4 inverter cooling hose to the fan with motor assembly.


b.

Attach the 3 clamps to connect the No. 5 inverter cooling hose to the fan with motor assembly.


Hide 16572D 5.CONNECT NO. 2 RADIATOR HOSE

a.

Connect the No. 2 radiator hose to the radiator assembly and slide the clip to secure it.

A435735C01
5.333,0.646 4.896,1.333 true 3.469,0.219 3.781,0.375 0.313,0.156 10 false *a 5.177,1.76 5.49,1.917 0.313,0.156 10 false *b 5.344,0.51 5.552,0.667 0.208,0.156 10 true *c 4.438,0.438 4.75,0.594 0.313,0.156 10 false *d 1.885,1.844 2.094,2.01 0.208,0.167 10 true A 6.146,1.833 6.458,1.99 0.313,0.156 10 false *f 5.354,1.281 5.667,1.438 0.313,0.156 10 false *e
*a View A *b 120°
*c Paint Mark *d Upper Side
*e RH Side *f 2 to 5 mm (0.0787 to 0.197 in.)


NOTICE:
·

Align the direction of the claw on the clip with the paint mark on the hose.

·

Make sure the No. 2 radiator hose is securely inserted to the stopper.




b.

Attach the clamp to connect the No. 2 radiator hose to the fan with motor assembly.


Hide 16571C 6.CONNECT NO. 1 RADIATOR HOSE

a.

Connect the No. 1 radiator hose to the radiator assembly and slide the clip to secure it.

A435738C01
3.594,0.76 4.094,1.333 true 3.167,0.188 3.479,0.344 0.313,0.156 10 false *a 3.688,1.719 4,1.875 0.313,0.156 10 false *b 3.396,0.635 3.604,0.792 0.208,0.156 10 true *c 4.354,0.438 4.667,0.594 0.313,0.156 10 false *d 1.354,1.771 1.563,1.938 0.208,0.167 10 true A 5.875,1.813 6.188,1.969 0.313,0.156 10 false *f 5.052,1.271 5.365,1.427 0.313,0.156 10 false *e
*a View A *b 120°
*c Paint Mark *d Upper Side
*e RH Side *f 2 to 5 mm (0.0787 to 0.197 in.)


NOTICE:
·

Align the direction of the claw on the clip with the paint mark on the hose.

·

Make sure the No. 1 radiator hose is securely inserted to the stopper.




b.

Attach the clamp to connect the No. 1 radiator hose to the fan with motor assembly.


Hide 16283 7.CONNECT NO. 6 WATER BY-PASS HOSE

a.

Connect the No. 6 water by-pass hose to the radiator assembly.


Hide 16282 8.CONNECT NO. 5 WATER BY-PASS HOSE

a.

Connect the No. 5 water by-pass hose to the radiator assembly and slide the clip to secure it.

A435740C01
5.24,0.635 4.552,1.313 true 3.385,0.292 3.698,0.448 0.313,0.156 10 false *a 5.031,1.688 5.344,1.844 0.313,0.156 10 false *b 5.271,0.5 5.479,0.656 0.208,0.156 10 true *c 4.271,0.396 4.583,0.552 0.313,0.156 10 false *d 2.125,1.563 2.333,1.729 0.208,0.167 10 true A 5.938,1.802 6.25,1.958 0.313,0.156 10 false *f 5.208,1.271 5.521,1.427 0.313,0.156 10 false *e
*a View A *b 120°
*c Paint Mark *d Upper Side
*e Rear Side *f 2 to 5 mm (0.0787 to 0.197 in.)


NOTICE:
·

Align the direction of the claw on the clip with the paint mark on the hose.

·

Make sure the No. 5 water by-pass hose is securely inserted to the stopper.




Hide 53205 9.INSTALL UPPER RADIATOR SUPPORT SUB-ASSEMBLY

a.

Install the upper radiator support sub-assembly with the 4 bolts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)


b.

Attach the 3 clamps to connect the wire harness to the upper radiator support sub-assembly.


c.

Attach the 2 clamps to connect the hood lock control cable assembly to the upper radiator support sub-assembly.


d.

Connect the 2 horn connectors.


Hide 86570 10.INSTALL VEHICLE APPROACHING SPEAKER ASSEMBLY

Hide 16593B 12.INSTALL NO. 1 RADIATOR AIR GUIDE RH

a.

Attach the guide and claw and install the No. 1 radiator air guide RH.


b.

Install the clip.


Hide 16595B 13.INSTALL NO. 1 RADIATOR AIR GUIDE LH

a.

Attach the guide and claw and install the No. 1 radiator air guide LH.


b.

Install the clip.


Hide 16681A 15.INSTALL UPPER RADIATOR AIR GUIDE PLATE

a.

Install the radiator upper air guide plate with the 5 clips.


Hide 17750A 16.INSTALL INLET AIR CLEANER ASSEMBLY

Hide 52021 17.INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

Hide 52614 18.INSTALL FRONT BUMPER NO. 2 ENERGY ABSORBER

Hide 16561C 19.INSTALL NO. 1 RADIATOR TO SUPPORT SEAL (w/ No. 1 Radiator To Support Seal)

a.

Attach the 2 guides to install the No. 1 radiator to support seal.


b.

Install the 3 clips.


Hide 51420 23.INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

Hide 51441 24.INSTALL NO. 1 ENGINE UNDER COVER

Hide 53896B 25.INSTALL FRONT FENDER FRONT SPLASH SHIELD LH

Hide 53895B 26.INSTALL FRONT FENDER FRONT SPLASH SHIELD RH