Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR › from 2020.08
RM3620E _59 Vehicle Exterior _076564 WIPER / WASHER _0373163 WASHER MOTOR A

WIPER / WASHER  WASHER MOTOR  INSTALLATION  


PROCEDURE

Hide 85397 1.INSTALL LEVEL WARNING SWITCH ASSEMBLY (w/ Level Warning Switch)

Hide 85330 2.INSTALL WINDSHIELD WASHER JAR ASSEMBLY

a.
B526386N01
1.563,1.135 1.76,1.333 0.198,0.198 10 true (1) 0.552,2.74 0.75,2.938 0.198,0.198 10 true (2) 3.083,2.042 3.281,2.24 0.198,0.198 10 true (3)

Attach the guide and temporarily place the windshield washer jar assembly.


b.

Install the windshield washer jar assembly with the 3 bolts in the order shown in the illustration.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


c.
B526385C01
2.292,1.865 2.573,2.073 0.281,0.208 12 true *A
*A w/ Level Warning Switch


w/ Level Warning Switch:

i.

Connect the connector.



d.

Attach the clamp.


e.
B526384

Attach the clamp and connect the washer hose.


Hide 85301 3.INSTALL WASHER INLET SUB-ASSEMBLY

a.
B526387C01
0.635,1.604 0.385,1.365 0.385,1.365 0.771,1.375 true 0.198,1.229 0.365,1.385 0.167,0.156 10 true *a
*a Matchmarks
V113146

Place Hand Here
V113147

Install in this Direction


Hold the position shown in the illustration and insert the washer inlet sub-assembly into the windshield washer jar in the direction indicated by the arrow.

HINT:

Align the matchmarks on the washer inlet with the matchmarks on the windshield washer jar assembly and install it.



b.

Install the washer inlet sub-assembly with the clip.


Hide 85280A 4.INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY (w/ Headlight Cleaner System)

Hide 85310 6.INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

a.
B526388C01
0,0 0,0 false
V113147

Install in this Direction
V100135

Washer hose
V100136

Connector


Install the windshield washer motor and pump assembly as shown in the illustration.


b.

Connect the connector.


c.

Connect the washer hose to the windshield washer motor and pump assembly.

HINT:

Insert washer hose to joint all the way.



Hide 7.ADD WASHER FLUID

a.
B526389

Connect the washer hose to the windshield washer motor and pump assembly.

HINT:

Insert washer hose to joint all the way.



b.

Add the windshield washer fluid to the windshield washer jar assembly.


Hide 53875A 8.INSTALL FRONT FENDER LINER RH

a.
B526380

Attach the claw to install the front fender liner RH and 4 grommets.


b.

w/ Mudguard:

i.

Install the 8 clips and 2 screws.

B526379C01
4.26,3.74 4.542,3.958 0.281,0.219 12 true *A
*A w/o Mudguard - -
V100135

Clip
V100136

Screw




c.

w/o Mudguard:

i.

Install the 9 clips and 2 screws.



Hide 75601A 9.INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH (except Off Road Package)

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>WHEEL OPENING MOULDING (for Front)>INSTALLATION


Hide 75601A 10.INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH (for Off Road Package)

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>WHEEL OPENING MOULDING (for Front)>INSTALLATION


Hide 76621D 12.INSTALL FRONT FENDER MUDGUARD RH (w/ Mudguard)

HINT:

Use the same procedure described for the LH side.

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>MUDGUARD>INSTALLATION


Hide 53895B 13.INSTALL FRONT FENDER FRONT SPLASH SHIELD RH (for Long Type)

a.
B526377

Attach the claw and install the front fender front splash shield RH.


b.

Install the 4 screws.


Hide 53895B 14.INSTALL FRONT FENDER FRONT SPLASH SHIELD RH (for Short Type)

a.
B526393

Attach the claw and install the front fender front splash shield RH.


b.

Install the 3 screws.


Hide 15.INSTALL FRONT WHEEL