51441
1.REMOVE NO. 1 ENGINE UNDER COVER
2.DRAIN ENGINE COOLANT
11209
3.REMOVE V-BANK COVER SUB-ASSEMBLY
17700
4.REMOVE AIR CLEANER ASSEMBLY
Loosen the hose clamp and disconnect the air cleaner from the air cleaner hose.
| *A | for Type A |
| *B | for Type B |
Loosen the 2 bolts and remove the air cleaner with the grommet.
17880
5.REMOVE AIR CLEANER HOSE ASSEMBLY
Disconnect the No. 2 ventilation hose.
Disconnect the vacuum hose.
Loosen the hose clamp and remove the air cleaner hose.
16571
6.REMOVE INLET RADIATOR HOSE
16572
7.DISCONNECT OUTLET RADIATOR HOSE
16711
8.REMOVE FAN SHROUD
16268A
9.DISCONNECT WATER BY-PASS PIPE HOSE (w/ Trailer Towing System)
17343
10.DISCONNECT NO. 3 AIR INJECTION SYSTEM HOSE
17342
11.DISCONNECT NO. 2 AIR INJECTION SYSTEM HOSE
17303
12.SEPARATE AIR PIPE SUB-ASSEMBLY
16281F
13.DISCONNECT NO. 5 WATER BY-PASS HOSE
16261G
14.REMOVE NO. 1 WATER BY-PASS HOSE
Remove the No. 1 water by-pass hose from the water by-pass joint and water inlet housing.
16323
15.REMOVE INLET WATER HOUSING
Remove the 3 bolts and inlet water housing and disconnect the No. 3 water by-pass hose from the inlet water housing.
Remove the gasket from the water pump.
16173
16.REMOVE WATER PUMP PULLEY
Using SST, hold the water pump pulley.
Remove the 4 bolts and water pump pulley.
16100
17.REMOVE ENGINE WATER PUMP ASSEMBLY
Remove the 8 bolts, engine water pump and the gasket.