1.INSTALL STEREO COMPONENT TUNER ASSEMBLY (w/ Satellite Radio)
86212
2.INSTALL NO. 2 RADIO RECEIVER BRACKET
w/o Satellite Radio:
Install the No. 2 radio receiver bracket with the 4 bolts.
w/ Satellite Radio:
Install the No. 2 radio receiver bracket with the 6 bolts.
86211J
3.INSTALL NO. 1 RADIO RECEIVER BRACKET
w/o Satellite Radio:
Install the No. 1 radio receiver bracket with the 4 bolts.
w/ Satellite Radio:
Install the No. 1 radio receiver bracket with the 6 bolts.
4.INSTALL NO. 1 NAVIGATION WIRE (w/ Satellite Radio)
55421B
5.INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL
Attach the 2 guides to install the upper instrument cluster finish panel.
Install the 4 screws.
86120
6.INSTALL NAVIGATION RECEIVER ASSEMBLY
Connect each connector.
Insert the navigation receiver assembly and attach the 2 guides and 3 clips on its backside.
When inserting the navigation receiver, do not press its knobs.
Install the navigation receiver assembly with the 4 bolts.
84010A
7.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
55434B
8.INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL
55410C
9.INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
58805C
10.INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
58804A
11.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
33504F
12.INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
55046A
13.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
53601
14.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
55318C
15.INSTALL INSTRUMENT SIDE PANEL LH
62112
16.INSTALL COWL SIDE TRIM BOARD LH
67914
17.INSTALL FRONT DOOR SCUFF PLATE LH