Use the same procedure for the LH side and RH side.
The procedure listed below is for the LH side.
84922C
1.INSTALL FRONT POWER SEAT SWITCH LH (w/o Memory)
Install the front power seat switch with the 3 screws.
Connect the connector.
84920
2.INSTALL LEG SUPPORT ADJUSTMENT SWITCH (w/ Leg Support Adjustment Switch)
Connect the connector.
Install the leg support adjustment switch with the 2 screws.
Engage the 2 wire harness clamps.
84922A
3.INSTALL FRONT POWER SEAT LUMBAR SWITCH (for Power Seat)
Install the front power seat lumbar switch with the 2 screws.
Connect the connector.
84922A
4.INSTALL FRONT POWER SEAT LUMBAR SWITCH (for Manual Seat)
Install the front power seat lumbar switch with the 2 screws.
Connect the connector.
71812D
5.INSTALL FRONT SEAT CUSHION SHIELD LH (for Power Seat)
71812D
6.INSTALL FRONT SEAT CUSHION SHIELD LH (for Manual Seat)
84921A
7.INSTALL RECLINING POWER SEAT SWITCH KNOB (for Power Seat)
84921B
8.INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB (for Power Seat)
72526
9.INSTALL RECLINING ADJUSTER RELEASE HANDLE LH (for Manual Seat)
72457
10.INSTALL VERTICAL SEAT ADJUSTER KNOB (for Manual Seat)
72495
11.INSTALL VERTICAL ADJUSTING HANDLE LH (for Manual Seat)
72459A
12.INSTALL VERTICAL SEAT ADJUSTER KNOB CAP (for Manual Seat)
13.INSTALL FRONT SEAT ASSEMBLY LH (for Power Seat)
Install the front seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Power Seat)>INSTALLATION).
14.INSTALL FRONT SEAT ASSEMBLY LH (for Manual Seat)
Install the front seat (See page Vehicle Interior>SEAT>FRONT SEAT ASSEMBLY(for Manual Seat)>INSTALLATION).