Electrostatic discharge.
Damage to or destruction of electrical components.
Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
For additional information see:
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for B48)
Click hereGeneral>MAINTENANCE>B48 BATTERY>REMOVAL
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for B58)
Click hereGeneral>MAINTENANCE>B58 BATTERY>REMOVAL
67914
3.REMOVE FRONT DOOR SCUFF PLATE LH
62112A
4.REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for LHD)
62112A
5.REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for RHD)
Use the same procedure as for the RH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>INSTRUMENT PANEL SAFETY PAD>REMOVAL
55606
6.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)
55607
7.REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RHD)
Use the same procedure as for the RH side.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX>REMOVAL
8.REMOVE ABSORBER CONTROL ECU
Fold the carpet (1) to the inside in the marked area.
Unlock and disconnect plug connections (1).
Unscrew the plastic nuts (1) and remove the absorber control ECU (2).