Home › Power Source / Network › B48 (BATTERY / CHARGING) › REAR POWER DISTRIBUTION BOX
RM3650E _57 Power Source / Network _080072 B48 BATTERY / CHARGING _0388704 REAR POWER DISTRIBUTION BOX A

B48 BATTERY / CHARGING  REAR POWER DISTRIBUTION BOX  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:
·

Working on 12 V vehicle electrical system.

Risk of short circuits! Risk of fire!

-

Disconnect the cable from the negative (-) battery terminal.




PROCEDURE

Hide 1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 81604 2.REMOVE TRIANGLE REFLECTOR SET

Hide 64716D 3.REMOVE DECK TRIM REAR COVER

Hide 62470A 4.REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH

Hide 64288D 5.REMOVE TRANSVERSE PIPE TRIM

Hide 62608 6.REMOVE SEAT BELT HOLE COVER SUB-ASSEMBLY RH

Hide 66311 7.REMOVE ROPE HOOK (w/ Courtesy Light)

Hide 64730C 8.REMOVE DECK TRIM SIDE BOARD AND DECK SIDE TRIM COVER RH

Hide 9.REMOVE REAR POWER DISTRIBUTION BOX

a.
A442555

Remove the cover (1) from the latch mechanisms (2) and fold open.


b.
A442556

Unscrew nuts (1), thread out the positive battery cables below it and set aside.


c.

Unlock and disconnect connector (2).


d.
A442557

Loosen nuts (1).


e.

Lift the rear power distribution box (2) in the rear off the threaded bolts and remove in direction of arrow.