Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.REMOVE REAR WHEEL
42340B
2.SEPARATE REAR DRIVE SHAFT ASSEMBLY
3.REMOVE REAR BRAKE DISC
Click hereBrake>BRAKE (REAR)>REAR BRAKE>REMOVAL
51206A
4.REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY
48790
5.REMOVE REAR UPPER CONTROL ARM ASSEMBLY
42450B
6.REMOVE REAR AXLE HUB AND BEARING ASSEMBLY
Slightly tilt rear drive shaft assembly (1) in order to access the bolts (markings).
| *a | Long "TORX" Socket Wrench |
Release the T60 bolts (1).
Remove rear axle hub and bearing assembly (2).