Home › Audio / Visual / Telematics › AUDIO / VIDEO › SATELLITE RADIO ANTENNA
RM27M0U _56 Audio / Visual / Telematics _049135 AUDIO / VIDEO _0234290 SATELLITE RADIO ANTENNA A

AUDIO / VIDEO  SATELLITE RADIO ANTENNA  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 63310 3.REMOVE ROOF HEADLINING ASSEMBLY

Hide 86960 4.REMOVE SATELLITE RADIO ANTENNA ASSEMBLY

a.

Disconnect the connector.

B355080E02
4.49,0.688 3.375,0.688 false 3.198,0.604 3.385,0.781 0.188,0.177 10 false *a

Text in Illustration
*a Guide - -


b.

Detach the 3 clamps.


c.

Remove the nut.


d.
B231078

Detach the 2 claws and guide and remove the satellite radio antenna assembly.