| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 8 | REAR CENTER SEAT OUTER BELT ASSEMBLY | 73350C | - | - | - |
| 9 | BENCH TYPE REAR SEAT CUSHION ASSEMBLY | - | - | - | - |
| 10 | REAR SEAT CUSHION LOCK HOOK | 72693 | - | - | - |
| 11 | REAR UNDER COVER | 86971G | - | - | - |
| 12 | REAR SEAT CUSHION LEG SUB-ASSEMBLY | 71033 | - | - | - |
| ● | Non-reusable part | - | - |
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during hybrid battery terminal block removal/installation are shown below.
Orange wire harnesses and connectors indicate high-voltage circuits. To prevent electric shock, always follow the procedure described in the repair manual.
Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM>PRECAUTION
To prevent electric shock, wear insulated gloves when working on wire harnesses and components of the high voltage system.
When the cable is disconnected / reconnected to the auxiliary battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
Learning completes when vehicle is driven
Learning completes when vehicle is operated normally
1. PRECAUTION
G3834
2.REMOVE SERVICE PLUG GRIP
73350C
8.DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
for 60/40 Split Seat Type:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 60/40 Split Seat Type)>REMOVAL
for 40/20/40 Split Seat Type:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 40/20/40 Split Seat Type)>REMOVAL
9.REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY
for 60/40 Split Seat Type:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 60/40 Split Seat Type)>REMOVAL
for 40/20/40 Split Seat Type:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 40/20/40 Split Seat Type)>REMOVAL
72693
10.REMOVE REAR SEAT CUSHION LOCK HOOK
for 60/40 Split Seat Type:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 60/40 Split Seat Type)>REMOVAL
for 40/20/40 Split Seat Type:
Click hereVehicle Interior>SEAT>REAR SEAT ASSEMBLY (for 40/20/40 Split Seat Type)>REMOVAL
76971G
11.REMOVE REAR UNDER COVER
71033
12.REMOVE REAR SEAT CUSHION LEG SUB-ASSEMBLY
G92Z2
19.REMOVE HYBRID BATTERY TERMINAL BLOCK
|
|
Disconnect the hybrid battery terminal block connector.
Insulate the disconnected high-voltage connector with insulating tape.
Disengage the claw to remove the hybrid battery terminal block from the HV battery.