Home › Vehicle Exterior › DOOR / HATCH › FUEL LID LOCK CONTROL CABLE ASSEMBLY(for 3 Door)
RM19S0E _59 Vehicle Exterior _051502 DOOR / HATCH _0248398 FUEL LID LOCK CONTROL CABLE ASSEMBLY(for 3 Door) A

DOOR / HATCH  FUEL LID LOCK CONTROL CABLE ASSEMBLY(for 3 Door)  INSTALLATION  


PROCEDURE

Hide 77377 1.INSTALL FUEL FILLER OPENING LID LOCK RETAINER

a.
B268974E06
1.313,1.229 2.219,1.719 false 1.729,1.292 2.458,1.042 2.458,1.042 1.688,0.896 false 1.51,0.885 2.156,0.354 false 2.24,1.646 2.625,1.885 0.385,0.24 10 false *1 2.469,0.958 2.875,1.198 0.406,0.24 10 false *3 2.156,0.25 2.542,0.49 0.385,0.24 10 false *2

Align the 2 claws B of the fuel filler opening lid lock retainer with the 2 slits.


b.

Push in and install the fuel filler opening lid lock retainer while securely engaging the 2 claws A.

Text in Illustration
*1 Claw A
*2 Claw B
*3 Slit


Hide 77035 2.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for LHD)

a.

Engage the 4 clamps and install the fuel lid lock control cable as shown in the illustration.

B284620E01
4.109,2.077 4.269,2.237 0.160,0.160 10 *1 3.299,2.218 3.460,2.378 0.160,0.160 10 *2 5.401,1.134 5.561,1.294 0.160,0.160 10 *1 6.243,1.166 6.403,1.326 0.160,0.160 10 *2 6.316,2.425 6.476,2.585 0.160,0.160 10 *1 6.191,3.144 6.351,3.304 0.160,0.160 10 *2 5.287,3.581 5.447,3.741 0.160,0.160 10 *1 5.821,3.834 5.981,3.993 0.160,0.160 10 *2 3.452,2.288 3.635,2.273 false 3.857,2.018 4.095,2.155 false 6.233,1.233 6.003,1.212 false 5.545,1.199 5.769,1.175 false 6.47,2.495 6.585,2.924 false 6.35,3.226 6.532,3.012 false 5.821,3.91 5.609,3.924 false 5.431,3.656 5.472,4.036 false

Text in Illustration
*1 Fuel Lid Lock Control Cable Sub-assembly *2 Wire Harness Clamp


b.
B273450

Engage the 2 claws and install the fuel lid lock control cable.


Hide 77035 3.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY (for RHD)

a.

Engage the 7 clamps and install the fuel lid lock control cable as shown in the illustration.

B284619E01
1.469,1.852 1.632,2.009 0.163,0.158 10 *1 0.641,1.979 0.804,2.137 0.163,0.158 10 *2 1.87,1.143 2.033,1.301 0.163,0.158 10 *1 2.712,1.15 2.875,1.307 0.163,0.158 10 *2 3.291,2.153 3.453,2.310 0.163,0.158 10 *1 4.114,2.128 4.277,2.286 0.163,0.158 10 *2 5.327,3.496 5.490,3.654 0.163,0.158 10 *1 5.879,3.723 6.042,3.881 0.163,0.158 10 *2 6.359,2.316 6.522,2.473 0.163,0.158 10 *1 6.247,3.066 6.410,3.223 0.163,0.158 10 *2 1.779,3.804 1.942,3.962 0.163,0.158 10 *1 2.609,3.785 2.772,3.943 0.163,0.158 10 *2 0.788,2.05 1.019,2.019 false 1.243,1.763 1.461,1.933 false 2.703,1.232 2.499,1.302 false 2.017,1.21 2.263,1.295 false 3.919,2.308 4.107,2.201 false 3.445,2.22 3.6,2.109 false 5.429,0.987 5.592,1.144 0.163,0.158 10 *1 6.228,1.046 6.390,1.203 0.163,0.158 10 *2 6.212,1.121 6.023,1.113 false 5.576,1.052 5.789,1.083 false 6.517,2.387 6.627,2.822 false 6.404,3.146 6.57,2.909 false 5.87,3.798 5.642,3.837 false 5.474,3.563 5.522,3.935 false 2.598,3.859 2.41,3.92 false 1.927,3.89 2.115,4.048 false

Text in Illustration
*1 Fuel Lid Lock Control Cable Sub-assembly *2 Wire Harness Clamp


b.
B273450

Engage the 2 claws and install the fuel lid lock control cable.


Hide 77306 4.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

a.

Connect the fuel lid lock control cable.


b.
B284627

Engage the guide.


c.

Install the fuel lid lock open lever with the bolt.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 58510D 5.INSTALL FRONT FLOOR CARPET ASSEMBLY

a.

Engage the 6 clamps.


b.

Install the front floor carpet with the clip.


Hide 09110 6.INSTALL JACK ASSEMBLY

Hide 58442F 7.INSTALL JACK COVER

Hide 64740C 8.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

HINT:

Use the same procedure as for the RH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING(for 3 Door)>INSTALLATION)


Hide 81250 9.INSTALL NO. 2 ROOM LIGHT ASSEMBLY (w/ Luggage Compartment Room Light)

Hide 73360 10.INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

Hide 73370 11.INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

HINT:

Use the same procedure as for the RH side.


Hide 62511 13.INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

Hide 62520P 14.INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

HINT:

Use the same procedure as for the RH side.


Hide 73201C 15.INSTALL FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY RH

Hide 73202B 16.INSTALL FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY LH

HINT:

Use the same procedure as for the RH side.


Hide 62311B 17.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

a.

Install the front door opening trim.


Hide 62312B 18.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

a.

Install the front door opening trim.


Hide 62112 20.INSTALL COWL SIDE TRIM BOARD LH

HINT:

Use the same procedure as for the RH side.


Hide 67914 22.INSTALL FRONT DOOR SCUFF PLATE LH

HINT:

Use the same procedure as for the RH side.


Hide 58912A 23.INSTALL REAR CONSOLE BOX

Hide 24.INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)

Hide 25.INSTALL REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)

Hide 26.INSTALL REAR SEAT ASSEMBLY (for Fold Down Seat Type)

Hide 27.INSTALL FRONT SEAT ASSEMBLY (for Driver Side)

Hide 28.INSTALL FRONT SEAT ASSEMBLY (for Front Passenger Side)