Home › Engine / Hybrid System › 1KR-FE (ENGINE MECHANICAL) › ENGINE UNIT › from 2020.07
RM36W0E _51 Engine / Hybrid System _091035 1KR-FE ENGINE MECHANICAL _0431331 ENGINE UNIT A

1KR-FE ENGINE MECHANICAL  ENGINE UNIT  REMOVAL  


PROCEDURE

Hide 16261G 2.REMOVE WATER BY-PASS HOSE ASSEMBLY

a.
A421813

Slide the 2 clips and remove the water by-pass hose assembly from the cylinder head sub-assembly and EGR cooler.


Hide 16281 3.REMOVE NO. 4 WATER BY-PASS HOSE

a.
A426880

Slide the clip and remove the No. 4 water by-pass hose from the cylinder head sub-assembly.


Hide 25680 4.REMOVE EGR COOLER ASSEMBLY

Hide 23814B 5.REMOVE FUEL DELIVERY PIPE

Hide 23291 6.REMOVE INJECTOR VIBRATION INSULATOR

Hide 29603B 7.REMOVE OIL LEVEL GAUGE GUIDE OIL HOSE

a.
A425310

Slide the 2 clips and remove the oil level gauge guide oil hose from the engine oil level dipstick guide and cylinder head sub-assembly.


Hide 89481B 9.REMOVE DIFFERENTIAL PRESSURE SENSOR (w/ Differential Pressure Sensor)

Hide 17140A 11.REMOVE EXHAUST MANIFOLD ASSEMBLY

Hide 12.REMOVE WIRE HARNESS CLAMP BRACKET

a.
A425311

Remove the bolt and the wire harness clamp bracket.