Slip Indicator Light Remains ON
Circuit diagnosis · Vehicles built from Nov 2005
DESCRIPTION
The SLIP indicator blinks during VSC and/or TRC operation.When the system fails, the SLIP indicator comes on to warn the driver (Click here).
WIRING DIAGRAM




INSPECTION PROCEDURE
- NOTICE:
- When replacing the ABS and TRACTION actuator, perform the zero point calibration (Click here).
| 1. INSPECT CAN COMMUNICATION SYSTEM |
Check if the CAN communication system DTC is output (Click here).
- Result:
Result
Proceed to
DTC not output
A
DTC output
B
|
|
||||
| A | |
| 2. CHECK SKID CONTROL ECU CONNECTOR |
Check if the skid control ECU connector is securely connected.
- OK:
- The connector is securely connected.
|
|
||||
| OK | |
| 3. INSPECT COMBINATION METER |
Check the combination meter (Click here).
|
|
||||
| OK | ||
| ||
