Hard starting (Engine can be cranked)
Precautions: General safety (00)
Perform troubleshooting referring to the following points when ECM has detected no DTC and no abnormality has been found in Visual Inspection:K14C and Engine Basic Inspection:K14C.
| Condition | Possible Cause | Action |
|---|---|---|
|
Hard starting (Engine can be cranked)
|
Faulty spark plug
|
|
|
Faulty ignition coil
|
||
|
Dirty or clogged fuel hoses or pipes
|
||
|
Malfunctioning fuel pump
|
||
|
Malfunctioning high pressure fuel pump
|
||
|
Air drawn in through intake manifold gasket or throttle body gasket
|
Check air intake system.
|
|
|
Faulty electric throttle body assembly
|
||
|
Faulty APP sensor
|
||
|
Faulty ECT sensor, MAP sensor or MAF sensor
|
||
|
Faulty ECM
|
||
|
Low compression
|
||
|
Poor spark plug tightening or faulty gasket
|
||
|
Compression leakage from valve seat
|
||
|
Sticky valve stem
|
||
|
Weak or damaged valve springs
|
||
|
Compression leakage at cylinder head gasket
|
||
|
Sticky or damaged piston ring
|
||
|
Worn piston, piston ring or cylinder
|
||
|
Malfunctioning PCV valve
|
||
|
VVT system out of order
|
•VVT actuator: Camshaft and VVT Actuator Inspection:K14C
•Valve timing: Timing Chain and Chain Tensioner Inspection:K14C •OCV oil circuit: Timing Chain Cover Inspection:K14C |
|
|
Faulty valve rocker arm
|
||
|
Faulty valve lash adjuster
|