Excessive hydrocarbon (HC) emission or carbon monoxide (CO) emission
Precautions: General safety (00)
Perform troubleshooting referring to the following points when ECM has detected no DTC and no abnormality has been found in Visual Inspection:K14C and Engine Basic Inspection:K14C.
| Condition | Possible Cause | Action |
|---|---|---|
|
Excessive hydrocarbon (HC) emission or carbon monoxide (CO) emission
|
Faulty spark plug
|
|
|
Faulty ignition coil assembly
|
||
|
Low compression
|
||
|
Lead contamination of TWC
|
Check for absence of filler neck restrictor.
|
|
|
Faulty evaporative emission control system
|
||
|
Fuel pressure out of specification
|
||
|
Faulty closed loop system (A/F feedback compensation) (Poor performance of ECT sensor, MAP sensor or MAF sensor)
|
||
|
Faulty electric throttle body assembly
|
||
|
Faulty APP sensor
|
||
|
Faulty fuel injector
|
||
|
Faulty ECM
|
||
|
Engine not at normal operating temperature
|
—
|
|
|
Clogged air cleaner
|
||
|
Vacuum leakage
|
||
|
VVT system out of order
|
•VVT actuator: Camshaft and VVT Actuator Inspection:K14C
•Valve timing: Timing Chain and Chain Tensioner Inspection:K14C •OCV oil circuit: Timing Chain Cover Inspection:K14C |