Tightening Torque Specifications
Precautions: General safety (00)
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Discharge hose bolt | 11 | 1.1 | 8.5 |
 |
| Liquid pipe bolt | 11 | 1.1 | 8.5 |
|
| Cap | 18 | 1.8 | 13.5 |
|
| Expansion valve bolt | 3.5 | 0.36 | 2.5 |
|
| Suction pipe bolt (HFC-134a) | 11 | 1.1 | 8.5 |
|
| Inner heat exchanger pipe bolt (HFO-1234yf) | 11 | 1.1 | 8.5 |
|
| A/C refrigerant pressure sensor | 11 | 1.1 | 8.5 |
|
| Tension pulley nut | 55 | 5.6 | 40.5 |
|
| Compressor mounting bolt (Petrol model) | 25 | 2.5 | 18.5 |
|
| Compressor mounting bolt (Diesel model) | 28 | 2.9 | 21.0 |
|
| Suction hose bolt | 11 | 1.1 | 8.5 |
|
| Suction & discharge hose bolt | 11 | 1.1 | 8.5 |
|
| Harness ground nut | 8.5 | 0.87 | 6.5 |
|
| Armature plate nut | 16 | 1.6 | 12.0 |
|
| Armature plate bolt | 13 | 1.3 | 9.5 |
|
| Relief valve (HFC-134a) | 10 | 1.0 | 7.5 |
|
| Relief valve (HFO-1234yf) | 13 | 1.3 | 9.5 |
|
Reference:
For the tightening torques of fasteners not specified in this page, refer to: