ENGINE > GENERAL MAINTENANCE |
| 1. REPLACE TIMING BELT |
| Type | See procedures |
| 2UZ-FE | Click here
|
| 2. INSPECT DRIVE BELT |
| Type | See procedures |
| 1GR-FE | Click here
|
| 2UZ-FE | Click here
|
| 3. REPLACE SPARK PLUGS |
| Type | See procedures |
| 1GR-FE | Click here
|
| 2UZ-FE | Click here
|
| 4. REPLACE ENGINE OIL AND OIL FILTER |
| Type | See procedures |
| 1GR-FE | Click here
|
| 2UZ-FE | Click here
|
| 5. REPLACE ENGINE COOLANT |
| Type | See procedures |
| 1GR-FE | Click here
|
| 2UZ-FE | Click here
|
| 6. INSPECT EXHAUST PIPES AND MOUNTINGS |
Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.
| 7. INSPECT BATTERY |
| Type | See procedures |
| 1GR-FE | Click here
|
| 2UZ-FE | Click here
|
| 8. INSPECT AIR CLEANER FILTER |
![]() |
Remove the air filter.
Visually check that the air filter is not excessively damaged or oily. If necessary, replace the air filter.
Reinstall the air filter.
| 9. REPLACE AIR CLEANER FILTER |
Replace the air filter with a new one.
| 10. INSPECT FUEL TANK CAP GASKET |
| Type | See procedures |
| 1GR-FE | Click here
|
| 2UZ-FE | Click here
|
| 11. INSPECT FUEL LINES AND CONNECTIONS AND FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BANDS |
Visually check the fuel lines for cracks, leakage, loose connections, deformation or tank band looseness.
| 12. INSPECT CHARCOAL CANISTER |
| Type | See procedures |
| 1GR-FE | Click here
|
| 2UZ-FE | Click here
|
| 13. INSPECT VALVE CLEARANCE |
| Type | See procedures |
| 1GR-FE | Click here
|
| 2UZ-FE | Click here
|