Operation of the VSC OFF switch changes the vehicle between normal mode, TRC OFF mode*1 (AUTO LSD mode*2) and VSC OFF mode. During normal mode, pressing the VSC OFF switch for a short amount of time changes vehicle to TRC OFF mode*1 (AUTO LSD mode*2). When the vehicle is stopped, pressing the VSC OFF switch for 3 seconds or more changes the vehicle to VSC OFF mode.
*1: for 4WD
*2: for 2WD
for 4WD:
When the transfer is in L4, VSC is prohibited and the VSC OFF indicator and TRC OFF indicator lights turn on.
When replacing the master cylinder solenoid, perform calibration (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>VEHICLE STABILITY CONTROL SYSTEM>CALIBRATION).
As there may be malfunctions in the transfer system related to when the transfer operates in L4, check the transfer system first (See page Drivetrain>VF4BM TRANSFER / 4WD / AWD>TRANSFER SYSTEM>INSPECTION).
OK
NG
(See pagePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING)
OK
NG
A
B
C
OK
(See pageVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING)
NG
OK
NG
OK
NG
OK
NG
OK
NG