Home › General › MAINTENANCE › ENGINE › from 2019.03
RM2090E _V1 General _060664 MAINTENANCE _0297466 ENGINE N

MAINTENANCE  ENGINE  GENERAL MAINTENANCE  


CAUTION / NOTICE / HINT

HINT:

Perform these procedures after the engine has cooled down.


PROCEDURE

Hide 1.INSPECT DRIVE BELT

Hide 2.INSPECT ENGINE OIL

Hide 3.REPLACE ENGINE OIL AND OIL FILTER

a.

Replace the engine oil and oil filter.

Click hereEngine / Hybrid System>FA20 (LUBRICATION)>OIL AND OIL FILTER>REPLACEMENT


Hide 4.INSPECT ENGINE COOLANT

Hide 5.REPLACE ENGINE COOLANT

a.

Replace the engine coolant.

Click hereEngine / Hybrid System>FA20 COOLING>COOLANT>REPLACEMENT


Hide 6.REPLACE SPARK PLUGS

Hide 7.REPLACE FUEL FILTER

a.

Replace the fuel filter.

Click hereEngine / Hybrid System>FA20 FUEL>FUEL PUMP>DISASSEMBLY


Hide 17801 9.INSPECT AIR CLEANER FILTER ELEMENT

a.

Remove the air cleaner filter element.


b.

Check that the air cleaner filter element is not excessively dirty. If the air cleaner filter element is excessively dirty, replace the air cleaner filter element.


c.

Clean the air cleaner filter element with compressed air.


d.

Reinstall the air cleaner filter element.


Hide 10.INSPECT EXHAUST PIPES AND MOUNTINGS

a.

Visually check the pipes, hangers and connections for severe corrosion, leaks or damage.


Hide 77310A 11.INSPECT FUEL TANK CAP ASSEMBLY

a.

Inspect the fuel tank cap gasket.

Click hereEngine / Hybrid System>FA20 EMISSION CONTROL>FUEL TANK CAP>INSPECTION


Hide 12.INSPECT FUEL LINES, CONNECTIONS, FUEL TANK VAPOR VENT SYSTEM HOSES AND FUEL TANK BANDS

a.

Visually check the fuel lines and hoses for cracks, leakage, loose connections, or deformation.


b.

Check for tank band looseness or deformation.


Hide 13.INSPECT CHARCOAL CANISTER (except Korea)

a.