Home › Power Source / Network › NETWORKING › CAN COMMUNICATION SYSTEM › 2020.08–2022.01
RM32K0E _57 Power Source / Network _059857 NETWORKING _0293867 CAN COMMUNICATION SYSTEM J

NETWORKING  CAN COMMUNICATION SYSTEM  Hybrid Vehicle Control ECU Communication Stop Mode  


DESCRIPTION

Detection Item Symptom Trouble Area
Hybrid Vehicle Control ECU Communication Stop Mode Any of the following conditions are met:
·

Communication stop for "Hybrid Vehicle Control" and/or "Hybrid Vehicle Control2" is indicated on the "Communication Bus Check" screen of the GTS.

Click here(Click here)

·

Communication stop history for "Hybrid Vehicle Control" and/or "Hybrid Vehicle Control2" is indicated on the "Communication Bus Check (Detail)" screen of the GTS. (The Lost Communication Time value for "Hybrid Vehicle Control" and/or "Hybrid Vehicle Control2" is 6 or more.)

Click here(Click here)

·

Communication system DTCs (DTCs that start with U) that correspond to "Hybrid Vehicle Control ECU Communication Stop Mode" in "DTC Combination Table" are output.

Click here(Click here)


·

Hybrid vehicle control ECU branch line or connector

·

Power source circuit of hybrid vehicle control ECU

·

Hybrid vehicle control ECU ground circuit

·

Hybrid vehicle control ECU



WIRING DIAGRAM

for LHD



C366173E04
1.75,0.49 2,0.656 0.25,0.167 10 false 9 1.76,1.042 2.01,1.208 0.25,0.167 10 false 20 1.76,1.583 2.01,1.75 0.25,0.167 10 false 3 1.75,2.115 2,2.281 0.25,0.167 10 false 14 0.344,2.573 0.844,2.74 0.5,0.167 10 false F124 0.344,2.74 2.469,3.073 2.125,0.333 10 false No. 5 Junction Connector 5.594,0.427 5.844,0.594 0.25,0.167 10 false 25 5.594,0.615 5.844,0.781 0.25,0.167 10 false F3 5.594,1.125 5.844,1.292 0.25,0.167 10 false F3 5.583,1.667 5.833,1.833 0.25,0.167 10 false F3 5.594,2.208 5.844,2.375 0.25,0.167 10 false F3 5.583,0.948 5.833,1.115 0.25,0.167 10 false 24 5.573,1.5 5.823,1.667 0.25,0.167 10 false 31 5.583,2.042 5.833,2.208 0.25,0.167 10 false 30 5.906,0.615 6.406,0.781 0.5,0.167 10 false CA1H 5.917,1.146 6.417,1.313 0.5,0.167 10 false CA1L 5.906,1.688 6.406,1.854 0.5,0.167 10 false CA3P 5.917,2.229 6.417,2.396 0.5,0.167 10 false CA3N 5.917,3.271 6.417,3.438 0.5,0.167 10 false MREL 5.917,3.823 6.417,3.99 0.5,0.167 10 false +B1 5.917,4.344 6.417,4.51 0.5,0.167 10 false +B2 5.917,4.896 6.417,5.063 0.5,0.167 10 false BATT 5.917,5.427 6.417,5.594 0.5,0.167 10 false IG2 5.917,5.969 6.417,6.135 0.5,0.167 10 false E12 5.917,6.5 6.417,6.667 0.5,0.167 10 false E01 5.917,7.052 6.417,7.219 0.5,0.167 10 false E02 5.896,7.583 6.396,7.75 0.5,0.167 10 false E1 5.625,3.094 5.875,3.26 0.25,0.167 10 false 6 5.552,3.281 5.969,3.448 0.417,0.167 10 false A48 5.552,3.813 5.969,3.979 0.417,0.167 10 false A48 5.625,3.635 5.875,3.802 0.25,0.167 10 false 4 5.604,4.167 5.854,4.333 0.25,0.167 10 false 1 5.531,4.344 5.948,4.51 0.417,0.167 10 false A49 5.615,4.698 5.865,4.865 0.25,0.167 10 false 3 5.583,4.885 5.833,5.052 0.25,0.167 10 false F3 5.625,5.25 5.875,5.417 0.25,0.167 10 false 3 5.552,5.417 5.969,5.583 0.417,0.167 10 false A49 5.615,5.781 5.865,5.948 0.25,0.167 10 false 4 5.583,7.01 5.833,7.177 0.25,0.167 10 false F3 5.625,6.292 5.875,6.458 0.25,0.167 10 false 5 5.583,6.5 5.833,6.667 0.25,0.167 10 false F2 5.635,6.844 5.885,7.01 0.25,0.167 10 false 5 5.625,7.365 5.875,7.531 0.25,0.167 10 false 6 5.594,7.563 5.844,7.729 0.25,0.167 10 false F2 5.583,5.958 5.833,6.125 0.25,0.167 10 false F3 5.323,7.938 7.156,8.188 1.833,0.25 10 false Hybrid Vehicle Control ECU 3.99,3.948 4.74,4.115 0.75,0.167 10 false PM-IGCT 3.854,5.021 5.104,5.188 1.25,0.167 10 false ECU-B NO. 2 3.792,5.552 5.042,5.719 1.25,0.167 10 false ECU-IG2 NO. 1 1.865,5.396 3.531,5.646 1.667,0.25 10 false from IG2 NO. 1 Relay 1.854,4.854 3.521,5.104 1.667,0.25 10 false from Auxiliary Battery 2.188,3.792 3.354,4.042 1.167,0.25 10 false from IGCT Relay 2.313,3.24 3.229,3.49 0.917,0.25 10 false to IGCT Relay 0.073,0.042 2.281,0.281 2.208,0.24 12 false for 2ZR-FXE:

C426508E01
1.75,0.49 2,0.656 0.25,0.167 10 false 9 1.76,1.042 2.01,1.208 0.25,0.167 10 false 20 1.76,1.583 2.01,1.75 0.25,0.167 10 false 3 1.75,2.115 2,2.281 0.25,0.167 10 false 14 0.344,2.573 0.844,2.74 0.5,0.167 10 false F124 0.344,2.74 2.469,3.073 2.125,0.333 10 false No. 5 Junction Connector 5.594,0.427 5.844,0.594 0.25,0.167 10 false 21 5.5,0.604 5.958,0.76 0.458,0.156 10 false F160 5.5,1.146 5.927,1.354 0.427,0.208 10 false F160 5.5,1.688 5.885,1.885 0.385,0.198 10 false F160 5.51,2.219 5.875,2.417 0.365,0.198 10 false F160 5.625,0.948 5.875,1.115 0.25,0.167 10 false 8 5.615,1.5 5.865,1.667 0.25,0.167 10 false 7 5.583,2.042 5.833,2.208 0.25,0.167 10 false 20 5.906,0.615 6.406,0.781 0.5,0.167 10 false CA1H 5.917,1.146 6.417,1.313 0.5,0.167 10 false CA1L 5.917,1.677 6.417,1.844 0.5,0.167 10 false CA3P 5.917,2.229 6.417,2.396 0.5,0.167 10 false CA3N 5.917,3.271 6.417,3.438 0.5,0.167 10 false MREL 5.917,3.823 6.417,3.99 0.5,0.167 10 false +B1 5.917,4.344 6.417,4.51 0.5,0.167 10 false +B2 5.917,4.896 6.417,5.063 0.5,0.167 10 false BATT 5.917,5.427 6.417,5.594 0.5,0.167 10 false IG2 5.917,5.969 6.417,6.135 0.5,0.167 10 false E12 5.917,6.5 6.417,6.667 0.5,0.167 10 false E01 5.917,7.052 6.417,7.219 0.5,0.167 10 false E02 5.896,7.583 6.396,7.75 0.5,0.167 10 false E1 5.625,3.094 5.875,3.26 0.25,0.167 10 false 5 5.542,3.271 5.958,3.438 0.417,0.167 10 false A97 5.552,3.813 5.969,3.979 0.417,0.167 10 false A97 5.594,3.635 5.844,3.802 0.25,0.167 10 false 11 5.604,4.167 5.854,4.333 0.25,0.167 10 false 1 5.5,4.344 5.917,4.51 0.417,0.167 10 false F160 5.615,4.698 5.865,4.865 0.25,0.167 10 false 3 5.51,4.885 5.885,5.063 0.375,0.177 10 false F161 5.594,5.25 5.844,5.417 0.25,0.167 10 false 35 5.5,5.427 5.917,5.594 0.417,0.167 10 false F160 5.583,5.781 5.833,5.948 0.25,0.167 10 false 34 5.51,7.031 5.906,7.229 0.396,0.198 10 false F160 5.573,6.281 5.823,6.448 0.25,0.167 10 false 12 5.51,6.49 5.896,6.677 0.385,0.188 10 false F160 5.573,6.844 5.823,7.01 0.25,0.167 10 false 11 5.625,7.365 5.875,7.531 0.25,0.167 10 false 3 5.51,7.573 5.875,7.771 0.365,0.198 10 false F161 5.51,5.969 5.906,6.125 0.396,0.156 10 false F160 5.323,7.938 7.156,8.188 1.833,0.25 10 false Hybrid Vehicle Control ECU 3.99,3.948 4.74,4.115 0.75,0.167 10 false PM-IGCT 3.854,5.021 5.104,5.188 1.25,0.167 10 false ECU-B NO. 2 3.792,5.552 5.042,5.719 1.25,0.167 10 false ECU-IG2 NO. 1 1.865,5.396 3.531,5.646 1.667,0.25 10 false from IG2 NO. 1 Relay 1.854,4.854 3.521,5.104 1.667,0.25 10 false from Auxiliary Battery 2.188,3.792 3.354,4.042 1.167,0.25 10 false from IGCT Relay 2.313,3.24 3.229,3.49 0.917,0.25 10 false to IGCT Relay 0.073,0.042 2.281,0.281 2.208,0.24 12 false for M20A-FXS:

for RHD



C366172E09
1.75,0.417 2,0.583 0.25,0.167 10 false 2 1.74,1 2.073,1.167 0.333,0.167 10 false 13 1.75,2.031 2.083,2.198 0.333,0.167 10 false 4 1.75,2.594 2.083,2.76 0.333,0.167 10 false 14 0.333,1.448 0.75,1.615 0.417,0.167 10 false F113 0.333,1.604 2.417,1.854 2.083,0.25 10 false No. 2 CAN Junction Connector 0.26,3.073 0.677,3.24 0.417,0.167 10 false F118 0.271,3.25 2.354,3.5 2.083,0.25 10 false No. 5 CAN Junction Connector 5.573,0.365 5.823,0.531 0.25,0.167 10 false 25 5.583,0.542 5.833,0.708 0.25,0.167 10 false F3 5.583,1.083 5.833,1.25 0.25,0.167 10 false F3 5.583,2.156 5.833,2.323 0.25,0.167 10 false F3 5.583,2.688 5.833,2.854 0.25,0.167 10 false F3 5.594,0.906 5.844,1.073 0.25,0.167 10 false 24 5.906,0.542 6.406,0.708 0.5,0.167 10 false CA1H 5.917,1.083 6.417,1.25 0.5,0.167 10 false CA1L 5.917,2.156 6.417,2.323 0.5,0.167 10 false CA3P 5.917,2.688 6.417,2.854 0.5,0.167 10 false CA3N 5.583,1.958 5.833,2.125 0.25,0.167 10 false 31 5.573,2.51 5.823,2.677 0.25,0.167 10 false 30 5.625,3.563 5.875,3.729 0.25,0.167 10 false 6 5.552,3.75 5.969,3.917 0.417,0.167 10 false A48 5.542,4.292 5.958,4.458 0.417,0.167 10 false A48 5.615,4.104 5.865,4.271 0.25,0.167 10 false 4 5.552,4.823 5.969,4.99 0.417,0.167 10 false A49 5.583,4.625 5.833,4.792 0.25,0.167 10 false 1 5.625,5.177 5.875,5.344 0.25,0.167 10 false 3 5.583,5.365 5.833,5.531 0.25,0.167 10 false F3 5.542,5.896 5.958,6.063 0.417,0.167 10 false A49 5.615,5.719 5.865,5.885 0.25,0.167 10 false 3 5.625,6.271 5.875,6.438 0.25,0.167 10 false 4 5.583,6.427 5.833,6.594 0.25,0.167 10 false F3 5.604,6.781 5.854,6.948 0.25,0.167 10 false 5 5.583,6.969 5.917,7.135 0.333,0.167 10 false F2 5.625,7.333 5.875,7.5 0.25,0.167 10 false 5 5.594,7.51 5.844,7.677 0.25,0.167 10 false F3 5.615,7.854 5.865,8.021 0.25,0.167 10 false 6 5.583,8.042 5.917,8.208 0.333,0.167 10 false F2 5.917,3.74 6.417,3.906 0.5,0.167 10 false MREL 5.917,4.313 6.417,4.479 0.5,0.167 10 false +B1 5.917,4.844 6.417,5.01 0.5,0.167 10 false +B2 5.917,5.365 6.417,5.531 0.5,0.167 10 false BATT 5.917,5.906 6.417,6.073 0.5,0.167 10 false IG2 5.917,6.427 6.417,6.594 0.5,0.167 10 false E12 5.917,6.99 6.417,7.156 0.5,0.167 10 false E01 5.917,7.521 6.417,7.688 0.5,0.167 10 false E02 5.917,8.042 6.417,8.208 0.5,0.167 10 false E1 5.396,8.438 7.156,8.688 1.76,0.25 10 false Hybrid Vehicle Control ECU 3.75,6.042 4.917,6.208 1.167,0.167 10 false ECU-IG2 NO. 1 3.781,5.521 4.948,5.688 1.167,0.167 10 false ECU-B NO. 2 3.969,4.458 4.719,4.625 0.75,0.167 10 false PM-IGCT 2.302,3.719 3.469,3.969 1.167,0.25 10 false to IGCT Relay 2.156,4.26 3.323,4.51 1.167,0.25 10 false from IGCT Relay 1.854,5.333 3.354,5.583 1.5,0.25 10 false from Auxiliary Battery 1.844,5.875 3.344,6.125 1.5,0.25 10 false from IG2 NO. 1 Relay 0.063,0.042 2.271,0.281 2.208,0.24 12 false for 2ZR-FXE:

C426505E01
1.75,0.417 2,0.583 0.25,0.167 10 false 2 1.74,1 2.073,1.167 0.333,0.167 10 false 13 1.75,2.031 2.083,2.198 0.333,0.167 10 false 4 1.75,2.594 2.083,2.76 0.333,0.167 10 false 14 0.333,1.448 0.75,1.615 0.417,0.167 10 false F113 0.333,1.604 2.417,1.854 2.083,0.25 10 false No. 2 CAN Junction Connector 0.26,3.073 0.677,3.24 0.417,0.167 10 false F118 0.271,3.25 2.354,3.5 2.083,0.25 10 false No. 5 CAN Junction Connector 5.573,0.365 5.823,0.531 0.25,0.167 10 false 21 5.51,0.552 5.938,0.75 0.427,0.198 10 false F160 5.5,1.094 5.917,1.281 0.417,0.188 10 false F160 5.5,2.156 5.875,2.354 0.375,0.198 10 false F160 5.51,2.698 5.958,2.875 0.448,0.177 10 false F161 5.615,0.906 5.865,1.073 0.25,0.167 10 false 8 5.906,0.542 6.406,0.708 0.5,0.167 10 false CA1H 5.917,1.083 6.417,1.25 0.5,0.167 10 false CA1L 5.917,2.156 6.417,2.323 0.5,0.167 10 false CA3P 5.917,2.688 6.417,2.854 0.5,0.167 10 false CA3N 5.615,1.958 5.865,2.125 0.25,0.167 10 false 7 5.573,2.51 5.823,2.677 0.25,0.167 10 false 20 5.625,3.563 5.875,3.729 0.25,0.167 10 false 5 5.542,3.76 5.958,3.927 0.417,0.167 10 false A97 5.531,4.302 5.948,4.469 0.417,0.167 10 false A97 5.563,4.104 5.813,4.271 0.25,0.167 10 false 11 5.5,4.833 5.917,5 0.417,0.167 10 false F160 5.583,4.625 5.833,4.792 0.25,0.167 10 false 1 5.583,5.177 5.833,5.344 0.25,0.167 10 false 27 5.51,5.365 5.896,5.573 0.385,0.208 10 false F161 5.51,5.906 5.927,6.073 0.417,0.167 10 false F160 5.583,5.719 5.833,5.885 0.25,0.167 10 false 35 5.594,6.271 5.844,6.438 0.25,0.167 10 false 34 5.51,6.427 5.917,6.615 0.406,0.188 10 false F160 5.573,6.781 5.823,6.948 0.25,0.167 10 false 12 5.51,6.969 5.906,7.135 0.396,0.167 10 false F160 5.583,7.333 5.833,7.5 0.25,0.167 10 false 11 5.51,7.51 5.896,7.677 0.385,0.167 10 false F160 5.615,7.854 5.865,8.021 0.25,0.167 10 false 3 5.51,8.042 5.927,8.208 0.417,0.167 10 false F161 5.917,3.74 6.417,3.906 0.5,0.167 10 false MREL 5.917,4.313 6.417,4.479 0.5,0.167 10 false +B1 5.917,4.844 6.417,5.01 0.5,0.167 10 false +B2 5.917,5.365 6.417,5.531 0.5,0.167 10 false BATT 5.917,5.906 6.417,6.073 0.5,0.167 10 false IG2 5.917,6.427 6.417,6.594 0.5,0.167 10 false E12 5.917,6.99 6.417,7.156 0.5,0.167 10 false E01 5.917,7.521 6.417,7.688 0.5,0.167 10 false E02 5.917,8.042 6.417,8.208 0.5,0.167 10 false E1 5.396,8.438 7.156,8.688 1.76,0.25 10 false Hybrid Vehicle Control ECU 3.75,6.042 4.917,6.208 1.167,0.167 10 false ECU-IG2 NO. 1 3.781,5.521 4.948,5.688 1.167,0.167 10 false ECU-B NO. 2 3.969,4.458 4.719,4.625 0.75,0.167 10 false PM-IGCT 2.302,3.719 3.469,3.969 1.167,0.25 10 false to IGCT Relay 2.156,4.26 3.323,4.51 1.167,0.25 10 false from IGCT Relay 1.854,5.333 3.354,5.583 1.5,0.25 10 false from Auxiliary Battery 1.844,5.875 3.344,6.125 1.5,0.25 10 false from IG2 NO. 1 Relay 0.063,0.042 2.271,0.281 2.208,0.24 12 false for M20A-FXS:

CAUTION / NOTICE / HINT

CAUTION:

When performing the confirmation driving pattern, obey all speed limits and traffic laws.


NOTICE:
·

Because the order of diagnosis is important to allow correct diagnosis, make sure to begin troubleshooting using How to Proceed with Troubleshooting when CAN communication system related DTCs are output.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING

·

Inspect the fuses for circuits related to this system before performing the following procedure.

·

Before measuring the resistance of the CAN bus, turn the power switch off and leave the vehicle for 1 minute or more without operating the key or any switches, or opening or closing the doors. After that, disconnect the cable from the negative (-) auxiliary battery terminal and leave the vehicle for 1 minute or more before measuring the resistance.

·

After the power switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When disconnecting and reconnecting the auxiliary battery.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART


·

Some parts must be initialized and set when replacing or removing and installing parts.

Click hereGeneral>SETUP>WHEN REPLACING OR REMOVING/INSTALLING PARTS>WORK PROCEDURE

·

After performing repairs, perform the DTC check procedure and confirm that the DTCs are not output again.

DTC check procedure: Turn the power switch on (IG) and wait for 1 minute or more.

Then operate the suspected malfunctioning system and drive the vehicle at 60 km/h (37 mph) or more for 5 minutes or more.

·

After the repair, perform the CAN bus check and check that all the ECUs and sensors connected to the CAN communication system are displayed as normal.

Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>DIAGNOSIS SYSTEM

·

Before replacing the hybrid vehicle control ECU, refer to Service Bulletin.



HINT:
·

Before disconnecting related connectors for inspection, push in on each connector body to check that the connector is not loose or disconnected.

·

When a connector is disconnected, check that the terminals and connector body are not cracked, deformed or corroded.



PROCEDURE

1.CHECK VEHICLE
a.

Check the vehicle specification.


Result:
Result Proceed to
for 2ZR-FXE A
for M20A-FXS B



A

2.CHECK FOR OPEN IN CAN BUS LINES (HYBRID VEHICLE CONTROL ECU BRANCH LINE)

B

5.CHECK FOR OPEN IN CAN BUS LINES (HYBRID VEHICLE CONTROL ECU BRANCH LINE)
2.CHECK FOR OPEN IN CAN BUS LINES (HYBRID VEHICLE CONTROL ECU BRANCH LINE)
a.

Disconnect the cable from the negative (-) auxiliary battery terminal.


b.

Disconnect the hybrid vehicle control ECU connector.


c.
C366200C01
1.417,0.5 1.917,0.75 0.5,0.25 2.083,2.667 2.26,2.24 true 2.667,2.667 2.521,2.25 true 2.833,1.583 2.521,1.885 true 1.583,2.667 2.281,2.021 true 1.24,2.667 1.854,2.865 0.615,0.198 10 false CA1L 2.917,1.49 3.354,1.688 0.438,0.198 10 false CA1H 2.646,2.708 3.26,2.906 0.615,0.198 10 false CA3P 1.76,2.688 2.375,2.885 0.615,0.198 10 false CA3N 0.167,0.135 0.781,0.333 0.615,0.198 10 false *a 1.594,0.531 2.208,0.729 0.615,0.198 10 false F3
*a Front view of wire harness connector
(to Hybrid Vehicle Control ECU)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F3-25 (CA1H) - F3-24 (CA1L) Cable disconnected from negative (-) auxiliary battery terminal 54 to 69 Ω
F3-31 (CA3P) - F3-30 (CA3N) Cable disconnected from negative (-) auxiliary battery terminal 54 to 69 Ω



Result:
Result
OK
NG



OK

3.CHECK HARNESS AND CONNECTOR (POWER SOURCE CIRCUIT)

NG

REPAIR OR REPLACE CAN BRANCH LINES OR CONNECTOR (HYBRID VEHICLE CONTROL ECU)

3.CHECK HARNESS AND CONNECTOR (POWER SOURCE CIRCUIT)
a.

Disconnect the hybrid vehicle control ECU connectors.


b.

Reconnect the cable to the negative (-) auxiliary battery terminal.


c.

Measure the voltage according to the value(s) in the table below.

C366207C02
4.75,0.417 5.25,0.667 0.5,0.25 1.833,0.417 2.333,0.667 0.5,0.25 4.896,1.208 5.917,0.75 true 1.25,0.802 1.823,1.208 true 0.167,0.167 0.479,0.323 0.313,0.156 10 false *a 1.969,0.448 2.375,0.615 0.406,0.167 10 false A49 4.917,0.438 5.323,0.604 0.406,0.167 10 false F3 1.021,0.646 1.427,0.813 0.406,0.167 10 false IG2 6.01,0.656 6.583,0.823 0.573,0.167 10 false BATT
*a Front view of wire harness connector
(to Hybrid Vehicle Control ECU)
- -


Standard Voltage:
Tester Connection Switch Condition Specified Condition
F3-3 (BATT) - Body ground Power switch off 11 to 14 V
A49-3 (IG2) - Body ground Power switch on (IG) 11 to 14 V



Result:
Result
OK
NG



OK

4.CHECK ECU POWER SOURCE CIRCUIT

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR (POWER SOURCE CIRCUIT)

4.CHECK ECU POWER SOURCE CIRCUIT

OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR (POWER SOURCE CIRCUIT)

5.CHECK FOR OPEN IN CAN BUS LINES (HYBRID VEHICLE CONTROL ECU BRANCH LINE)
a.

Disconnect the cable from the negative (-) auxiliary battery terminal.


b.

Disconnect the hybrid vehicle control ECU connector.


c.
C349823C10
1.521,0.302 2.052,0.573 0.531,0.271 1.927,1.813 2.292,0.823 true 1.771,1.792 1.479,0.865 true 2.385,2.885 2.021,2.01 true 1.552,2.833 1.844,2.01 true 0.094,0.073 0.406,0.271 0.313,0.198 10 false *a 1.323,2.885 1.875,3.094 0.552,0.208 10 false CA3N 1.073,0.771 1.604,0.979 0.531,0.208 10 false CA3P 2.365,0.729 2.896,0.958 0.531,0.229 10 false CA1L 2.219,2.927 2.76,3.115 0.542,0.188 10 false CA1H 1.615,0.344 2.146,0.552 0.531,0.208 10 false F160
*a Front view of wire harness connector
(to Hybrid Vehicle Control ECU)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
F160-21 (CA1H) - F160-8 (CA1L) Cable disconnected from negative (-) auxiliary battery terminal 54 to 69 Ω
F160-7 (CA3P) - F160-20 (CA3N) Cable disconnected from negative (-) auxiliary battery terminal 54 to 69 Ω



Result:
Result
OK
NG



OK

6.CHECK HARNESS AND CONNECTOR (POWER SOURCE CIRCUIT)

NG

REPAIR OR REPLACE CAN BRANCH LINES OR CONNECTOR (HYBRID VEHICLE CONTROL ECU)

6.CHECK HARNESS AND CONNECTOR (POWER SOURCE CIRCUIT)
a.

Disconnect the hybrid vehicle control ECU connectors.


b.

Reconnect the cable to the negative (-) auxiliary battery terminal.


c.

Measure the voltage according to the value(s) in the table below.

A368649C35
3.583,0.729 4,0.958 0.417,0.229 0.385,0.74 0.802,0.969 0.417,0.229 2.458,1.479 2.729,1.094 true 4.74,1.49 4.417,1.083 true 0.115,0.083 0.427,0.24 0.313,0.156 10 false *a 0.438,0.771 0.813,1.021 0.375,0.25 10 false F160 3.646,0.76 4.083,1.052 0.438,0.292 10 false F161 4.635,1.51 5.229,1.698 0.594,0.188 10 false BATT 2.313,1.521 2.625,1.677 0.313,0.156 10 false IG2
*a Front view of wire harness connector
(to Hybrid Vehicle Control ECU)
- -


Standard Voltage:
Tester Connection Switch Condition Specified Condition
F160-27 (BATT) - Body ground Power switch off 11 to 14 V
F160-35 (IG2) - Body ground Power switch on (IG) 11 to 14 V



Result:
Result
OK
NG



OK

7.CHECK ECU POWER SOURCE CIRCUIT

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR (POWER SOURCE CIRCUIT)

7.CHECK ECU POWER SOURCE CIRCUIT

Result:
Result
OK
NG



OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR (POWER SOURCE CIRCUIT)