Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM › 2019.09–2020.08
RM32H0E _56 Audio / Visual / Telematics _060571 PARK ASSIST / MONITORING _0297206 BLIND SPOT MONITOR SYSTEM T

PARK ASSIST / MONITORING  BLIND SPOT MONITOR SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Entire System
Symptom Suspected Area Link
System does not operate at all Proceed to "Power Source Circuit" Click here
CAN communication system Click here
Blind spot monitor sensor LH (Master) Click here
System cannot be turned off CAN communication system Click here
Blind spot monitor sensor LH (Master) Click here
"Blind Spot Monitor Unavailable" or "Blind Spot Monitor System Malfunction Visit Your Dealer" is displayed on the multi-information display Check abnormality history Click here
Blind spot monitor sensor RH (Slave) Click here
Blind spot monitor sensor LH (Master) Click here
Combination meter assembly Click here

Blind Spot Monitor Function
Symptom Suspected Area Link
Outer rear view mirror indicator RH does not illuminate Proceed to "Blind Spot Monitor Beam Axis Confirmation" Click here
Outer mirror RH Click here
Outer rear view mirror assembly RH Click here
Blind spot monitor sensor RH (Slave) Click here
Outer rear view mirror indicator LH does not illuminate Proceed to "Blind Spot Monitor Beam Axis Confirmation" Click here
Outer mirror LH Click here
Outer rear view mirror assembly LH Click here
Blind spot monitor sensor LH (Master) Click here
Outer rear view mirror indicator RH remains illuminated Proceed to "Blind Spot Monitor Beam Axis Confirmation" Click here
Blind spot monitor sensor RH (Slave) Click here
Outer rear view mirror indicator LH remains illuminated Proceed to "Blind Spot Monitor Beam Axis Confirmation" Click here
Blind spot monitor sensor LH (Master) Click here
Outer rear view mirror indicator RH does not flash Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting (EXT) section (w/ Headlight ECU) Click here
Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting (EXT) section (w/o Headlight ECU) Click here
Blind spot monitor sensor RH (Slave) Click here
Outer rear view mirror indicator LH does not flash Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting (EXT) section (w/ Headlight ECU) Click here
Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting (EXT) section (w/o Headlight ECU) Click here
Blind spot monitor sensor LH (Master) Click here
Outer rear view mirror indicator RH continues to flash Blind spot monitor sensor RH (Slave) Click here
Outer rear view mirror indicator LH continues to flash Blind spot monitor sensor LH (Master) Click here

RCTA Function
Symptom Suspected Area Link
Function does not operate at all
(Blind spot monitor function operates normally)
Data List / Active Test (Reverse) Click here
Continuously Variable Transaxle System (for K114) Click here
Continuously Variable Transaxle System (for K313) Click here
Continuously Variable Transaxle System (for K313F) Click here
Back-up light switch (for EC6A) Click here
Blind spot monitor sensor RH (Slave) Click here
While RCTA function is active, outer rear view mirror indicator flashes but RCTA buzzer does not sound. Proceed to "Buzzer does not Sound" Click here