Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › BLIND SPOT MONITOR SYSTEM

BLIND SPOT MONITOR SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
  1. Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  2. Inspect the fuses and relays related to this system before inspecting the suspected areas below.


Entire System 
Symptom
Suspected Area
See page
System does not operate at all
(both the blind spot monitor function and RCTA function do not operate)
Proceed to "Power Source Circuit"
Click here
Proceed to "Main Switch Circuit"
Click here
Blind spot monitor sensor RH
Click here
System cannot be turned off
Proceed to "Main Switch Circuit"
Click here
Blind spot monitor sensor RH
Click here
"BSM not available" or "Check BSM System" is displayed on the multi-information display
Check abnormality history
Click here
Blind spot monitor sensor RH
Click here
Blind spot monitor sensor LH
Click here
Combination meter assembly
Click here

Blind Spot Monitor Function 
Symptom
Suspected Area
See page
Outer rear view mirror indicator RH does not illuminate
Proceed to "Blind Spot Monitor Beam Axis Confirmation"
Click here
Outer rear view mirror RH
Click here
Outer mirror control ECU assembly RH
Click here
Outer rear view mirror assembly RH
Click here
Blind spot monitor sensor RH
Click here
Outer rear view mirror indicator LH does not illuminate
Proceed to "Blind Spot Monitor Beam Axis Confirmation"
Click here
Outer rear view mirror LH
Click here
Outer mirror control ECU assembly LH
Click here
Outer rear view mirror assembly LH
Click here
Blind spot monitor sensor LH
Click here
Outer rear view mirror indicator RH remains illuminated
Proceed to "Blind Spot Monitor Beam Axis Confirmation"
Click here
Blind spot monitor sensor RH
Click here
Outer rear view mirror indicator LH remains illuminated
Proceed to "Blind Spot Monitor Beam Axis Confirmation"
Click here
Blind spot monitor sensor LH
Click here
Outer rear view mirror indicator RH does not flash
Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting (EXT) section
Click here
Blind spot monitor sensor RH
Click here
Outer rear view mirror indicator LH does not flash
Proceed to "Turn Signal Light" in Problem Symptoms Table for the Lighting (EXT) section
Click here
Blind spot monitor sensor LH
Click here
Outer rear view mirror indicator RH continues to flash
Blind spot monitor sensor RH
Click here
Outer rear view mirror indicator LH continues to flash
Blind spot monitor sensor LH
Click here

RCTA Function 
Symptom
Suspected Area
See page
Function does not operate at all
(the blind spot monitor function operates normally)
Data List / Active Test (Reverse (Only for AT/CVT))
Click here
Automatic transaxle system (for U660E)
Click here
Automatic transaxle system (for U760E)
Click here
Blind spot monitor sensor RH
Click here