Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2017.09–2017.12
RM33A0E _58 Vehicle Interior _065381 METER / GAUGE / DISPLAY _0323396 METER / GAUGE SYSTEM C

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  B150819  Turn Signal/Hazard Flasher Circuit Current Above Threshold  


DESCRIPTION

This DTC is stored when the combination meter assembly detects a short in a turn signal light circuit.

HINT:

If there is a short in a turn signal light circuit, all of the turn signal lights in that circuit will not blink.


DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note
B150819 Turn Signal/Hazard Flasher Circuit Current Above Threshold Diagnosis Condition:

Battery voltage is 10 V or more


Malfunction Status:

Short in turn signal light circuit


·

Headlight ECU sub-assembly

·

Head light unit assembly

·

Headlight lens*1

·

Side turn signal light assembly

·

Outer rear view mirror assembly*4

·

Outer mirror retractor*5

·

Rear combination light assembly*2

·

Rear combination light cord*2

·

Rear combination light socket and wire*3

·

Harness or connector

·

Combination meter assembly


DTC stored -

*1: for LED Type Turn Signal Light

*2: for LED Type Back-up Light

*3: for Bulb Type Back-up Light

*4: w/ Seat Position Memory System

*5: w/o Seat Position Memory System


WIRING DIAGRAM

LH side


E375729E02
0.313,1.906 1.188,2.323 0.875,0.417 10 false Headlight Unit Assembly LH 1.531,2.031 3.688,2.406 2.156,0.375 10 false Headlight ECU Sub-assembly LH 2.219,0.708 2.74,1.021 0.521,0.313 10 false TURN+ 1.531,1.885 2.052,2.198 0.521,0.313 10 false B 3.333,0.708 3.854,1.021 0.521,0.313 10 false TNS 2.219,1.052 2.74,1.365 0.521,0.313 10 false TURN- 3.302,1.063 3.823,1.375 0.521,0.313 10 false GND 1.427,2.76 3.583,3.135 2.156,0.375 10 false Headlight Assembly LH 1.115,2.76 1.635,3.073 0.521,0.313 10 false A10 3.729,0.698 4.25,1.01 0.521,0.313 10 false 11 3.729,1.063 4.25,1.375 0.521,0.313 10 false 12 5.354,0.708 5.875,1.021 0.521,0.313 10 false 11 5.604,0.708 6.125,1.021 0.521,0.313 10 false LL 1.448,5.521 3.604,5.896 2.156,0.375 10 false Headlight Assembly LH 1.125,5.531 1.646,5.844 0.521,0.313 10 false A10 0.313,4.646 1.188,5.063 0.875,0.417 10 false Headlight Unit Assembly LH 1.542,4.792 3.698,5.167 2.156,0.375 10 false Headlight ECU Sub-assembly LH 1.542,4.635 2.063,4.948 0.521,0.313 10 false B 2.24,3.802 2.76,4.115 0.521,0.313 10 false TURN- 2.229,3.458 2.75,3.771 0.521,0.313 10 false TURN+ 3.344,3.469 3.865,3.781 0.521,0.313 10 false TNS 3.323,3.813 3.844,4.125 0.521,0.313 10 false GND 3.729,3.813 4.25,4.125 0.521,0.313 10 false 12 3.719,3.469 4.24,3.781 0.521,0.313 10 false 11 0.563,4.177 1.833,4.5 1.271,0.323 10 false Headlight Lens LH 5.771,7.625 6.938,8 1.167,0.375 10 false Combination Meter Assembly 5.469,7.625 5.99,7.938 0.521,0.313 10 false K20 0.5,7.51 2.917,8.073 2.417,0.563 10 false Outer Rear View Mirror Assembly LH 3.281,7.5 4.5,7.865 1.219,0.365 10 false Outer Mirror Control ECU Assembly LH 0.271,6.948 2.688,7.51 2.417,0.563 10 false Side Turn Signal Light Assembly LH 0.188,8.135 2.604,8.698 2.417,0.563 10 false *1: for Bulb Type Turn Signal Light 5.031,6.042 5.552,6.354 0.521,0.313 10 false *3 5,3.448 5.521,3.76 0.521,0.313 10 false *2 5.031,0.708 5.552,1.021 0.521,0.313 10 false *1 6.177,3.917 6.844,4.302 0.667,0.385 10 false FLASHER IC 3.417,6.531 3.938,6.844 0.521,0.313 10 false HTR- 4,6.531 4.521,6.844 0.521,0.313 10 false GND 0.188,7.51 0.708,7.823 0.521,0.313 10 false O16 3.063,6.656 3.583,6.969 0.521,0.313 10 false O9 4.469,6.656 4.99,6.969 0.521,0.313 10 false O8 3.073,6.448 3.594,6.76 0.521,0.313 10 false 12 4.521,6.448 5.042,6.76 0.521,0.313 10 false 7 2.396,6.052 2.917,6.365 0.521,0.313 10 false B 2.396,6.552 2.917,6.865 0.521,0.313 10 false - 2.615,6.052 3.135,6.365 0.521,0.313 10 false 10 2.615,6.552 3.135,6.865 0.521,0.313 10 false 11 2.01,0.708 2.531,1.021 0.521,0.313 10 false 9 1.969,1.063 2.49,1.375 0.521,0.313 10 false 13 1.969,3.802 2.49,4.115 0.521,0.313 10 false 13 2.01,3.458 2.531,3.771 0.521,0.313 10 false 9 5.208,7.521 5.729,7.833 0.521,0.313 10 false A 2.865,8.135 5.281,8.698 2.417,0.563 10 false *2: for LED Type Turn Signal Light 0.188,8.438 2.854,8.667 2.667,0.229 10 false *3: w/ Seat Position Memory System

E376455E02
5.625,3.083 6.698,3.281 1.073,0.198 10 false TRNL 5.719,6.552 6.896,6.99 1.177,0.438 10 false Combination Meter Assembly 1.094,3.813 3.292,4.094 2.198,0.281 10 false Rear Combination Light Cord LH 0.719,4.292 3.521,4.531 2.802,0.24 10 false Rear Combination Light Assembly LH 0.729,6.292 3.531,6.531 2.802,0.24 10 false Rear Combination Light Assembly LH 0.313,5.813 3.115,6.052 2.802,0.24 10 false Rear Combination Light Socket and Wire LH 3,3.104 4.073,3.302 1.073,0.198 10 false B 3,3.438 4.073,3.635 1.073,0.198 10 false E 6.156,3.167 6.823,3.542 0.667,0.375 10 false FLASHER IC 0.635,2.323 3.292,2.646 2.656,0.323 10 false Outer Rear View Mirror Assembly LH 0.396,1.156 1.74,1.521 1.344,0.365 10 false Side Turn Signal Light Assembly LH 2.042,1.125 2.844,1.49 0.802,0.365 10 false Outer Mirror Retractor LH 5,0.375 6.073,0.573 1.073,0.198 10 false *1 0.354,7.031 3.469,7.406 3.115,0.375 10 false *1: w/o Seat Position Memory System 2.823,7.031 5.073,7.24 2.25,0.208 10 false *2: for LED Type Back-up Light 0.344,4.292 1.417,4.49 1.073,0.198 10 false W13 0.354,6.292 1.427,6.49 1.073,0.198 10 false W13 5.292,3.083 6.365,3.281 1.073,0.198 10 false 10 5.406,6.552 6.479,6.75 1.073,0.198 10 false K20 3.26,3.104 3.75,3.552 0.49,0.448 10 false 3 3.271,3.438 3.76,3.885 0.49,0.448 10 false 4 3.042,0.396 3.542,0.771 0.5,0.375 10 false 10 3.052,0.729 3.552,1.104 0.5,0.375 10 false 11 0.302,2.323 1.375,2.521 1.073,0.198 10 false O16 2.802,0.396 3.875,0.594 1.073,0.198 10 false B 2.802,0.729 3.875,0.927 1.073,0.198 10 false E 5.198,0.063 6.271,0.26 1.073,0.198 10 false A 0.354,7.365 2.448,7.552 2.094,0.188 10 false *3: for Bulb Type Back-up Light 5.01,3.083 6.083,3.281 1.073,0.198 10 false *2 5,5.063 6.073,5.26 1.073,0.198 10 false *3 3,5.427 4.073,5.625 1.073,0.198 10 false E 3,5.083 4.073,5.281 1.073,0.198 10 false B 3.25,5.083 3.74,5.531 0.49,0.448 10 false 3 3.25,5.427 3.74,5.875 0.49,0.448 10 false 4


RH side


E375729E03
0.313,1.906 1.188,2.323 0.875,0.417 10 false Headlight Unit Assembly RH 1.531,2.031 3.688,2.406 2.156,0.375 10 false Headlight ECU Sub-assembly RH 2.219,0.719 2.74,1.031 0.521,0.313 10 false TURN+ 1.531,1.885 2.052,2.198 0.521,0.313 10 false B 3.333,0.719 3.854,1.031 0.521,0.313 10 false TNS 2.219,1.063 2.74,1.375 0.521,0.313 10 false TURN- 3.302,1.063 3.823,1.375 0.521,0.313 10 false GND 1.427,2.76 3.583,3.135 2.156,0.375 10 false Headlight Assembly RH 1.104,2.76 1.625,3.073 0.521,0.313 10 false A11 3.729,0.708 4.25,1.021 0.521,0.313 10 false 11 3.729,1.073 4.25,1.385 0.521,0.313 10 false 12 5.396,0.719 5.917,1.031 0.521,0.313 10 false 7 5.604,0.719 6.125,1.031 0.521,0.313 10 false LR 1.448,5.521 3.604,5.896 2.156,0.375 10 false Headlight Assembly RH 1.115,5.531 1.635,5.844 0.521,0.313 10 false A11 0.313,4.646 1.188,5.063 0.875,0.417 10 false Headlight Unit Assembly RH 1.51,4.833 3.667,5.208 2.156,0.375 10 false Headlight ECU Sub-assembly RH 1.531,4.635 2.052,4.948 0.521,0.313 10 false B 2.24,3.813 2.76,4.125 0.521,0.313 10 false TURN- 2.24,3.438 2.76,3.75 0.521,0.313 10 false TURN+ 3.333,3.458 3.854,3.771 0.521,0.313 10 false TNS 3.313,3.813 3.833,4.125 0.521,0.313 10 false GND 3.729,3.813 4.25,4.125 0.521,0.313 10 false 12 3.719,3.458 4.24,3.771 0.521,0.313 10 false 11 0.563,4.177 1.833,4.5 1.271,0.323 10 false Headlight Lens RH 5.771,7.625 6.938,8 1.167,0.375 10 false Combination Meter Assembly 5.469,7.625 5.99,7.938 0.521,0.313 10 false K20 0.448,7.531 2.865,8.094 2.417,0.563 10 false Outer Rear View Mirror Assembly RH 0.25,6.948 2.667,7.51 2.417,0.563 10 false Side Turn Signal Light Assembly RH 0.198,8.146 2.615,8.708 2.417,0.563 10 false *1: for Bulb Type Turn Signal Light 3,8.146 5.417,8.708 2.417,0.563 10 false *2: for LED Type Turn Signal Light 0.198,8.458 2.844,8.698 2.646,0.24 10 false *3: w/ Seat Position Memory System 5.042,6.042 5.563,6.354 0.521,0.313 10 false *3 5,3.448 5.521,3.76 0.521,0.313 10 false *2 5.031,0.719 5.552,1.031 0.521,0.313 10 false *1 6.177,3.917 6.844,4.302 0.667,0.385 10 false FLASHER IC 3.406,6.542 3.927,6.854 0.521,0.313 10 false HTR- 3.99,6.531 4.51,6.844 0.521,0.313 10 false GND 0.115,7.531 0.635,7.844 0.521,0.313 10 false N19 3.031,6.656 3.552,6.969 0.521,0.313 10 false N10 4.469,6.656 4.99,6.969 0.521,0.313 10 false N9 3.073,6.458 3.594,6.771 0.521,0.313 10 false 12 4.521,6.458 5.042,6.771 0.521,0.313 10 false 7 2.385,6.052 2.906,6.365 0.521,0.313 10 false B 2.396,6.542 2.917,6.854 0.521,0.313 10 false - 2.625,6.052 3.146,6.365 0.521,0.313 10 false 10 2.625,6.542 3.146,6.854 0.521,0.313 10 false 11 5.208,7.521 5.729,7.833 0.521,0.313 10 false B 2.01,0.719 2.531,1.031 0.521,0.313 10 false 9 1.958,1.063 2.479,1.375 0.521,0.313 10 false 13 1.969,3.813 2.49,4.125 0.521,0.313 10 false 13 2.021,3.438 2.542,3.75 0.521,0.313 10 false 9 3.302,7.5 4.521,7.865 1.219,0.365 10 false Outer Mirror Control ECU Assembly RH

E376455E03
5.615,3.083 6.688,3.281 1.073,0.198 10 false TRNR 5.719,6.563 6.896,7 1.177,0.438 10 false Combination Meter Assembly 1,3.823 3.198,4.104 2.198,0.281 10 false Rear Combination Light Cord RH 0.708,4.313 3.51,4.552 2.802,0.24 10 false Rear Combination Light Assembly RH 0.729,6.302 3.531,6.542 2.802,0.24 10 false Rear Combination Light Assembly RH 0.302,5.813 3.104,6.052 2.802,0.24 10 false Rear Combination Light Socket and Wire RH 3,3.094 4.073,3.292 1.073,0.198 10 false B 3.01,5.083 4.083,5.281 1.073,0.198 10 false B 3.01,5.427 4.083,5.625 1.073,0.198 10 false E 3,3.438 4.073,3.635 1.073,0.198 10 false E 6.156,3.167 6.823,3.542 0.667,0.375 10 false FLASHER IC 0.635,2.313 3.292,2.635 2.656,0.323 10 false Outer Rear View Mirror Assembly RH 0.396,1.156 1.74,1.521 1.344,0.365 10 false Side Turn Signal Light Assembly RH 2.042,1.135 2.854,1.479 0.813,0.344 10 false Outer Mirror Retractor RH 5.021,0.385 6.094,0.583 1.073,0.198 10 false *1 0.167,6.938 3.042,7.156 2.875,0.219 10 false *1: w/o Seat Position Memory System 0.302,4.313 1.375,4.51 1.073,0.198 10 false W12 0.313,6.302 1.385,6.5 1.073,0.198 10 false W12 5.323,3.083 6.396,3.281 1.073,0.198 10 false 13 5.406,6.563 6.479,6.76 1.073,0.198 10 false K20 3.25,3.094 3.75,3.469 0.5,0.375 10 false 3 3.271,5.083 3.76,5.531 0.49,0.448 10 false 3 3.281,5.427 3.771,5.875 0.49,0.448 10 false 4 3.25,3.438 3.74,3.885 0.49,0.448 10 false 4 3.042,0.385 3.542,0.75 0.5,0.365 10 false 10 3.042,0.729 3.542,1.104 0.5,0.375 10 false 11 0.302,2.313 1.375,2.51 1.073,0.198 10 false N19 2.792,0.385 3.865,0.583 1.073,0.198 10 false B 2.781,0.729 3.854,0.927 1.073,0.198 10 false E 5.198,0.083 6.271,0.281 1.073,0.198 10 false B 2.719,6.948 4.625,7.219 1.906,0.271 10 false *2: for LED Type Back-up Light 0.156,7.323 2.063,7.594 1.906,0.271 10 false *3: for Bulb Type Back-up Light 5.021,3.083 5.521,3.458 0.5,0.375 10 false *2 5.01,5.063 5.51,5.438 0.5,0.375 10 false *3


CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.

·

Inspect the turn signal light bulbs and sockets before performing the following procedure.



PROCEDURE

1.INSPECT LIGHTS
a.

Inspect the illumination of each turn signal light.


Result:
Result Proceed to
All LH turn signal lights do not blink A
All RH turn signal lights do not blink B



A

2.CHECK HEADLIGHT ASSEMBLY LH

B

14.CHECK HEADLIGHT ASSEMBLY RH
2.CHECK HEADLIGHT ASSEMBLY LH
a.

Disconnect the A10 headlight assembly LH connector.


b.

Operate the headlight dimmer switch assembly and check that the LH side turn signal lights other than the headlight turn signal light blink.

HINT:

If the LH side turn signal lights blink, the headlight assembly LH is malfunctioning.



Result:
Result Proceed to
LH side turn signal lights blink A
LH side turn signal lights do not blink B



A

3.CHECK HEADLIGHT ECU SUB-ASSEMBLY LH

B

6.CHECK OUTER REAR VIEW MIRROR ASSEMBLY LH
3.CHECK HEADLIGHT ECU SUB-ASSEMBLY LH
E334043C09
2.156,0.219 2.458,0.427 0.302,0.208 5.604,0.323 5.906,0.531 0.302,0.208 1.219,0.302 1.646,0.813 true 3.146,0.865 3.458,0.323 true 5.323,0.979 5.083,0.385 true 6.052,1.104 6.448,0.385 true 0.094,0.115 0.406,0.313 0.313,0.198 10 false *a 2.188,0.229 2.5,0.427 0.313,0.198 10 false A10 5.708,0.333 6.021,0.531 0.313,0.198 10 false B 1.073,0.115 1.385,0.313 0.313,0.198 10 false TNS 3.354,0.146 3.667,0.344 0.313,0.198 10 false GND 4.875,0.198 5.406,0.417 0.531,0.219 10 false TURN+ 6.271,0.198 6.823,0.417 0.552,0.219 10 false TURN-
*a Component without harness connected
(Headlight ECU Sub-assembly LH)
- -


a.

Remove the headlight ECU sub-assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ECU>REMOVAL


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
B-9 (TURN+) - B-13 (TURN-)
or
A10-11 (TNS) - A10-12 (GND)
Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

4.CONFIRM MODEL

NG

REPLACE HEADLIGHT ECU SUB-ASSEMBLY LH

4.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for LED Type Turn Signal Light A
for Bulb Type Turn Signal Light B



A

5.INSPECT HEADLIGHT LENS LH

B

6.CHECK OUTER REAR VIEW MIRROR ASSEMBLY LH
a.

Connect the A10 headlight assembly LH connector.


b.

Disconnect the O16 outer rear view mirror assembly LH connector.


c.

Operate the headlight dimmer switch assembly and check that the LH side turn signal lights other than the side turn signal light blink.

HINT:

If the LH side turn signal lights blink, the outer rear view mirror assembly LH is malfunctioning.



Result:
Result Proceed to
LH side turn signal lights blink A
LH side turn signal lights do not blink B



A

7.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH

B

9.CHECK REAR COMBINATION LIGHT ASSEMBLY LH
7.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH
a.

Remove the side turn signal light assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>SIDE TURN SIGNAL LIGHT ASSEMBLY>REMOVAL


b.

Inspect the side turn signal light assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>SIDE TURN SIGNAL LIGHT ASSEMBLY>INSPECTION


Result:
Proceed to
OK
NG



OK

8.CONFIRM MODEL

NG

REPLACE SIDE TURN SIGNAL LIGHT ASSEMBLY LH

8.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
w/ Seat Position Memory System A
w/o Seat Position Memory System B



A

REPLACE OUTER REAR VIEW MIRROR ASSEMBLY LH

B

REPLACE OUTER MIRROR RETRACTOR LH

9.CHECK REAR COMBINATION LIGHT ASSEMBLY LH
a.

Connect the O16 outer rear view mirror assembly LH connector.


b.

Disconnect the W13 rear combination light assembly LH connector.


c.

Operate the headlight dimmer switch assembly and check that the LH side turn signal lights other than the rear turn signal light blink.

HINT:

If the LH side turn signal lights blink, the rear combination light assembly LH is malfunctioning.



Result:
Result Proceed to
LH side turn signal lights blink A
LH side turn signal lights do not blink B



A

10.CONFIRM MODEL

B

12.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY LH - COMBINATION METER ASSEMBLY)
10.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for LED Type Back-up Light A
for Bulb Type Back-up Light B



A

11.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

B

REPLACE REAR COMBINATION LIGHT SOCKET AND WIRE LH

11.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH
a.

Remove the rear combination light assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY>REMOVAL


b.

Inspect the rear combination light assembly LH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY>INSPECTION


Result:
Proceed to
OK
NG



OK

REPLACE REAR COMBINATION LIGHT CORD LH

NG

REPLACE REAR COMBINATION LIGHT ASSEMBLY LH

12.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY LH - COMBINATION METER ASSEMBLY)
a.

Disconnect the K20 combination meter assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
W13-3 (B) or K20-10 (TRNL) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

13.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY LH AND OUTER REAR VIEW MIRROR ASSEMBLY LH - COMBINATION METER ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

13.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY LH AND OUTER REAR VIEW MIRROR ASSEMBLY LH - COMBINATION METER ASSEMBLY)
a.

Disconnect the A10 headlight assembly LH connector.


b.

Disconnect the O16 outer rear view mirror assembly LH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A10-11 (TNS), O16-10 (B) or K20-11 (LL) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE COMBINATION METER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

14.CHECK HEADLIGHT ASSEMBLY RH
a.

Disconnect the A11 headlight assembly RH connector.


b.

Operate the headlight dimmer switch assembly and check that the RH side turn signal lights other than the headlight turn signal light blink.

HINT:

If the RH side turn signal lights blink, the headlight assembly RH is malfunctioning.



Result:
Result Proceed to
RH side turn signal lights blink A
RH side turn signal lights do not blink B



A

15.CHECK HEADLIGHT ECU SUB-ASSEMBLY RH

B

18.CHECK OUTER REAR VIEW MIRROR ASSEMBLY RH
15.CHECK HEADLIGHT ECU SUB-ASSEMBLY RH
E334043C11
2.156,0.219 2.458,0.427 0.302,0.208 5.604,0.323 5.906,0.531 0.302,0.208 1.219,0.302 1.646,0.813 true 3.146,0.865 3.458,0.323 true 5.323,0.979 5.083,0.385 true 6.052,1.104 6.448,0.385 true 0.094,0.115 0.406,0.313 0.313,0.198 10 false *a 2.198,0.24 2.51,0.438 0.313,0.198 10 false A11 5.719,0.344 6.031,0.542 0.313,0.198 10 false B 1.073,0.125 1.385,0.323 0.313,0.198 10 false TNS 3.354,0.146 3.667,0.344 0.313,0.198 10 false GND 4.875,0.198 5.375,0.365 0.5,0.167 10 false TURN+ 6.26,0.208 6.771,0.396 0.51,0.188 10 false TURN-
*a Component without harness connected
(Headlight ECU Sub-assembly RH)
- -


a.

Remove the headlight ECU sub-assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>HEADLIGHT ECU>REMOVAL


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
B-9 (TURN+) - B-13 (TURN-)
or
A11-11 (TNS) - A11-12 (GND)
Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

16.CONFIRM MODEL

NG

REPLACE HEADLIGHT ECU SUB-ASSEMBLY RH

16.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for LED Type Turn Signal Light A
for Bulb Type Turn Signal Light B



A

17.INSPECT HEADLIGHT LENS RH

B

18.CHECK OUTER REAR VIEW MIRROR ASSEMBLY RH
a.

Connect the A11 headlight assembly RH connector.


b.

Disconnect the N19 outer rear view mirror assembly RH connector.


c.

Operate the headlight dimmer switch assembly and check that the RH side turn signal lights other than the side turn signal light blink.

HINT:

If the RH side turn signal lights blink, the outer rear view mirror assembly RH is malfunctioning.



Result:
Result Proceed to
RH side turn signal lights blink A
RH side turn signal lights do not blink B



A

19.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH

B

21.CHECK REAR COMBINATION LIGHT ASSEMBLY RH
19.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH
a.

Remove the side turn signal light assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>SIDE TURN SIGNAL LIGHT ASSEMBLY>REMOVAL


b.

Inspect the side turn signal light assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>SIDE TURN SIGNAL LIGHT ASSEMBLY>INSPECTION


Result:
Proceed to
OK
NG



OK

20.CONFIRM MODEL

NG

REPLACE SIDE TURN SIGNAL LIGHT ASSEMBLY RH

20.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
w/ Seat Position Memory System A
w/o Seat Position Memory System B



A

REPLACE OUTER REAR VIEW MIRROR ASSEMBLY RH

B

REPLACE OUTER MIRROR RETRACTOR RH

21.CHECK REAR COMBINATION LIGHT ASSEMBLY RH
a.

Connect the N19 outer rear view mirror assembly RH connector.


b.

Disconnect the W12 rear combination light assembly RH connector.


c.

Operate the headlight dimmer switch assembly and check that the RH side turn signal lights other than the rear turn signal light blink.

HINT:

If the RH side turn signal lights blink, the rear combination light assembly RH is malfunctioning.



Result:
Result Proceed to
RH side turn signal lights blink A
RH side turn signal lights do not blink B



A

22.CONFIRM MODEL

B

24.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY RH - COMBINATION METER ASSEMBLY)
22.CONFIRM MODEL
a.

Choose the model to be inspected.


Result:
Result Proceed to
for LED Type Back-up Light A
for Bulb Type Back-up Light B



A

23.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH

B

REPLACE REAR COMBINATION LIGHT SOCKET AND WIRE RH

23.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH
a.

Remove the rear combination light assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY>REMOVAL


b.

Inspect the rear combination light assembly RH.

Click hereVehicle Exterior>LIGHTING (EXT)>REAR COMBINATION LIGHT ASSEMBLY>INSPECTION


Result:
Proceed to
OK
NG



OK

REPLACE REAR COMBINATION LIGHT CORD RH

NG

REPLACE REAR COMBINATION LIGHT ASSEMBLY RH

24.CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT ASSEMBLY RH - COMBINATION METER ASSEMBLY)
a.

Disconnect the K20 combination meter assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
W12-3 (B) or K20-13 (TRNR) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

25.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY RH AND OUTER REAR VIEW MIRROR ASSEMBLY RH - COMBINATION METER ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

25.CHECK HARNESS AND CONNECTOR (HEADLIGHT ASSEMBLY RH AND OUTER REAR VIEW MIRROR ASSEMBLY RH - COMBINATION METER ASSEMBLY)
a.

Disconnect the A11 headlight assembly RH connector.


b.

Disconnect the N19 outer rear view mirror assembly RH connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
A11-11 (TNS), N19-10 (B) or K20-7 (LR) - Body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

REPLACE COMBINATION METER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR