| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0234 | Actual turbocharger pressure is deviated 100 kPa (750 mmHg, 29.5 in.Hg) or more from the simulated target pressure for 60 seconds and 2 times (1 trip detection logic) | ·
Open or short in VN turbo control circuit ·
Turbocharger sub-assembly ·
Turbocharger actuator (built into turbocharger sub-assembly) ·
EGR valve assembly ·
Mass air flow meter sub-assembly ·
Vacuum hose ·
Exhaust system is clogged ·
ECM |
| P0299 | Actual turbocharger pressure is deviated -50 kPa (-375 mmHg, -14.8 in.Hg) to -100 kPa (-750 mmHg, -29.5 in.Hg) or more from the simulated target pressure for 40 seconds and 4 times (1 trip detection logic) | ·
Open or short in VN turbo control circuit ·
Turbocharger sub-assembly ·
Turbocharger actuator (built into turbocharger sub-assembly) ·
EGR valve assembly ·
Mass air flow meter sub-assembly ·
Exhaust system and intake system are modified or clogged ·
ECM |
| P1251 | Actual turbocharger pressure is deviated 40 kPa (300 mmHg, 11.8 in.Hg) or more from the simulated target pressure for 0.5 seconds (1 trip detection logic) | ·
Open or short in VN turbo control circuit ·
Turbocharger sub-assembly ·
Turbocharger actuator (built into turbocharger sub-assembly) ·
EGR valve assembly ·
ECM |
Refer to DTC P0045 (Click hereEngine / Hybrid System>N04C-VQ (ENGINE CONTROL)>ECD SYSTEM>P0045).
Inspect the fuses for circuits related to this system before performing the following inspection procedure.
After replacing the ECM, the new ECM needs registration (Click hereEngine / Hybrid System>N04C-VQ (ENGINE CONTROL)>ECD SYSTEM>REGISTRATION) and initialization (Click hereEngine / Hybrid System>N04C-VQ (ENGINE CONTROL)>ECD SYSTEM>INITIALIZATION).
Read freeze frame data using the GTS. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or not, as well as other data recorded at the time of a malfunction.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
Read the DTCs.
| Result | Proceed to |
|---|---|
| DTC P0234, P0299 and/or P1251 are output | A |
| DTC P0234, P0299 and/or P1251 and other DTCs are output | B |
If any DTCs other than P0234, P0299 and/or P1251 are output, troubleshoot those DTCs first.
A
B
Check the intake and exhaust systems modifications.
No modifications.
Check that the intake and exhaust systems are not clogged.
Intake and exhaust systems are not clogged.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check the vacuum hoses of vacuum sensor connections.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Inspect the turbocharger sub-assembly (Click hereEngine / Hybrid System>N04C-VQ (INTAKE)>TURBOCHARGER>REMOVAL).
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Inspect the EGR valve assembly (Click hereEngine / Hybrid System>N04C-VQ (EMISSION CONTROL)>EMISSION CONTROL SYSTEM>ON-VEHICLE INSPECTION).
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Inspect the mass air flow meter sub-assembly (Click hereEngine / Hybrid System>N04C-VQ (ENGINE CONTROL)>MASS AIR FLOW METER>INSPECTION).
| Proceed to |
|---|
| OK |
| NG |
OK
NG