1.CHECK INJECTOR COMPENSATION CODE
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
58701A
3.REMOVE FRONT ENGINE SERVICE COVER PANEL SUB-ASSEMBLY
51441D
4.REMOVE NO. 1 ENGINE UNDER COVER
51445D
5.REMOVE ENGINE UNDER COVER BRACKET RH
51446C
6.REMOVE ENGINE UNDER COVER BRACKET LH
7.DRAIN ENGINE OIL
8.DRAIN ENGINE COOLANT
16400
9.REMOVE RADIATOR ASSEMBLY
27020
10.REMOVE GENERATOR ASSEMBLY
17141
11.REMOVE EXHAUST MANIFOLD
23670
12.REMOVE INJECTOR ASSEMBLY
17111
13.REMOVE INTAKE MANIFOLD
87245A
14.DISCONNECT INLET HEATER WATER HOSE A
16577C
15.REMOVE RADIATOR PIPE
87208L
16.REMOVE WATER PIPE SUB-ASSEMBLY
17.REMOVE NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY
16206
18.REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY
19.REMOVE NO. 3 NOZZLE LEAKAGE PIPE SUB-ASSEMBLY
20.SET NO. 1 CYLINDER TO TDC/COMPRESSION
13901
21.REMOVE NO. 1 VALVE ROCKER SHAFT SUB-ASSEMBLY
13781
22.REMOVE VALVE PUSH ROD
13819
23.REMOVE VALVE BRIDGE
11101
24.REMOVE CYLINDER HEAD SUB-ASSEMBLY
Remove the 22 cylinder head bolts in the order shown in the illustration.
Lift and remove the cylinder head sub-assembly from the cylinder block sub-assembly.
Remove the 8 valve lifters.
Organize the parts so that each parts location can be remembered for reassembly.
11115
25.REMOVE CYLINDER HEAD GASKET
Remove the cylinder head gasket.