Home › Vehicle Exterior › WINDOW / GLASS › REAR SIDE WINDOW GLASS (for No. 3 LH) › 2017.01–2019.08
RM2850E _59 Vehicle Exterior _073195 WINDOW / GLASS _0356219 REAR SIDE WINDOW GLASS(for No. 3 LH) A

WINDOW / GLASS  REAR SIDE WINDOW GLASS(for No. 3 LH)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for RHD vehicles.



PROCEDURE

Hide 1.INSTALL REAR SIDE WINDOW FRONT GLASS LH

a.

Clean and shape the contact surface of the vehicle body.

i.
B455055E01
0.583,1.177 0.583,1.448 false 0.5,1.479 0.813,1.677 0.313,0.198 10 false *a 3.115,0.375 3.26,0.552 0.146,0.177 10 false a

On the contact surface of the vehicle body, use a knife to cut away excess adhesive as shown in the illustration.

Standard:
Area Specified Condition
a 1.0 to 3.0 mm (0.0394 to 0.118 in.)



ii.

Clean the contact surface of the vehicle body with non-residue solvent.

Text in Illustration
*a Vehicle Body
V100155

Adhesive



b.

Using non-residue solvent, clean the rear side front window glass LH installation surface of the vehicle body.


c.

Install the body primer to the rear side front window glass LH installation surface of the vehicle body.

NOTICE:
·

Do not apply too much primer.

·

Do not apply primer to the adhesive.

·

When applying the primer, take care of the seams of the panel and spot welds.




d.

Install the suction cups to the rear side front window glass LH.


e.

for Slide Type:

i.

Using a brush or sponge, apply primer to the contact surface of the rear side front window glass LH.

NOTICE:
·

Do not apply too much primer.

·

Allow the primer to dry for 3 minutes or more.



B475092E01
1.073,0.927 1.229,1.125 0.156,0.198 10 false A 1.073,1.323 1.229,1.521 0.156,0.198 10 false A 0.354,1.74 0.521,1.906 0.167,0.167 10 false B 0.771,1.74 0.927,1.906 0.156,0.167 10 false B 2.396,2.49 2.552,2.688 0.156,0.198 10 false C 2.396,2.885 2.552,3.083 0.156,0.198 10 false C 2.969,2.125 3.125,2.323 0.156,0.198 10 false D 3.344,2.125 3.5,2.323 0.156,0.198 10 false D 0.146,0.125 0.458,0.323 0.313,0.198 10 false *a 3.906,0.344 4.24,0.51 0.333,0.167 10 false A-A 3.927,2.125 4.26,2.292 0.333,0.167 10 false C-C 5.615,0.344 5.948,0.51 0.333,0.167 10 false B-B 5.604,2.115 5.938,2.281 0.333,0.167 10 false D-D

Text in Illustration
*a Back Side - -
V100155

Primer Application Area - -


ii.

Apply adhesive to the rear side front window glass LH.

Adhesive:

Toyota Genuine Windshield Glass Adhesive or Equivalent



iii.
B214800E32
2.479,0.573 2.958,0.406 true 1.198,0.479 1.344,0.604 false 0.563,0.604 0.813,0.844 0.25,0.24 10 false a 1.302,1.406 1.552,1.646 0.25,0.24 10 false a 0.771,1.021 1.021,1.26 0.25,0.24 10 false b 1.115,0.906 1.365,1.146 0.25,0.24 10 false b 2.99,0.292 3.24,0.531 0.25,0.24 10 false *1

Cut off the tip of the cartridge nozzle as shown in the illustration.

Standard:
Area Specified Condition
a 12.0 mm (0.472 in.)
b 8.0 mm (0.315 in.)


Text in Illustration
*1 Sealer Gun


iv.

Apply adhesive to the rear side front window glass LH as shown in the illustration.

NOTICE:

Allow the primer to dry for 3 minutes or more.


B475088E01
4.25,1.25 4.438,1.198 false 5.938,1.271 6.125,1.219 false 4.635,2.917 4.833,2.948 false 6.313,2.917 6.51,2.948 false 0.146,0.115 0.458,0.313 0.313,0.198 10 false *a 1.083,0.927 1.25,1.094 0.167,0.167 10 false A 1.083,1.323 1.25,1.49 0.167,0.167 10 false A 0.354,1.76 0.677,2 0.323,0.24 10 false B 0.76,1.75 1.052,2.031 0.292,0.281 10 false B 2.396,2.49 2.563,2.656 0.167,0.167 10 false C 2.396,2.875 2.563,3.042 0.167,0.167 10 false C 2.969,2.135 3.135,2.302 0.167,0.167 10 false D 3.365,2.135 3.531,2.302 0.167,0.167 10 false D 3.896,0.344 4.292,0.51 0.396,0.167 10 false A-A 5.604,0.333 6,0.5 0.396,0.167 10 false B-B 3.906,2.104 4.302,2.271 0.396,0.167 10 false C-C 5.594,2.104 5.99,2.271 0.396,0.167 10 false D-D 4.469,0.667 4.635,0.833 0.167,0.167 10 false a 6.24,0.677 6.406,0.844 0.167,0.167 10 false b 4.521,2.406 4.688,2.573 0.167,0.167 10 false a 6.552,2.583 6.823,2.813 0.271,0.229 10 false a 6.063,2.26 6.333,2.49 0.271,0.229 10 false c 4.052,1.188 4.271,1.354 0.219,0.167 10 false *b 5.771,1.208 5.99,1.375 0.219,0.167 10 false *b 4.875,2.896 5.094,3.063 0.219,0.167 10 false *b 6.573,2.885 6.792,3.052 0.219,0.167 10 false *b

Text in Illustration
*a Back Side *b R End
V100155

Adhesive - -

Standard:
Area Specified Condition
a 9.0 mm (0.354 in.)
b 13.0 mm (0.512 in.)
c 5.0 mm (0.197 in.)




f.

Fixed Type:

i.

Using a brush or sponge, apply glass primer to the contact surface of the rear side front window glass LH.

NOTICE:
·

Do not apply too much primer.

·

Allow the primer to dry for 3 minutes or more.



B475080E01
0.135,0.115 0.448,0.313 0.313,0.198 10 false *a 2.125,0.948 2.281,1.146 0.156,0.198 10 false A 2.125,1.344 2.281,1.542 0.156,0.198 10 false A 0.302,1.625 0.458,1.823 0.156,0.198 10 false B 0.667,1.625 0.823,1.823 0.156,0.198 10 false B 2.177,2.542 2.333,2.74 0.156,0.198 10 false C 2.177,2.927 2.333,3.125 0.156,0.198 10 false C 2.99,2.229 3.146,2.427 0.156,0.198 10 false D 3.406,2.229 3.563,2.427 0.156,0.198 10 false D 3.896,0.333 4.24,0.5 0.344,0.167 10 false A-A 5.604,0.333 5.948,0.5 0.344,0.167 10 false B-B 3.885,2.115 4.229,2.281 0.344,0.167 10 false C-C 5.594,2.104 5.938,2.271 0.344,0.167 10 false D-D

Text in Illustration
*a Back Side - -
V100155

Glass Primer Application Area - -


ii.

Apply adhesive to the rear side front window glass LH.

Adhesive:

Toyota Genuine Windshield Glass Adhesive or Equivalent



iii.
B214800E32
2.479,0.573 2.958,0.406 true 1.198,0.479 1.344,0.604 false 0.563,0.604 0.813,0.844 0.25,0.24 10 false a 1.302,1.406 1.552,1.646 0.25,0.24 10 false a 0.771,1.021 1.021,1.26 0.25,0.24 10 false b 1.115,0.906 1.365,1.146 0.25,0.24 10 false b 2.99,0.292 3.24,0.531 0.25,0.24 10 false *1

Cut off the tip of the cartridge nozzle as shown in the illustration.

Standard:
Area Specified Condition
a 12.0 mm (0.472 in.)
b 8.0 mm (0.315 in.)


Text in Illustration
*1 Sealer Gun


iv.

Apply adhesive to the rear side front window glass LH as shown in the illustration.

NOTICE:

Allow the primer to dry for 3 minutes or more.


B475084E01
4.51,1.417 4.625,1 true 6.219,1.427 6.333,1.021 true 4.354,3.198 4.469,2.781 true 6.094,2.792 5.885,3.156 5.885,3.156 5.979,2.781 true 0.135,0.104 0.375,0.271 0.24,0.167 10 false *a 2.135,0.948 2.375,1.115 0.24,0.167 10 false A 2.135,1.344 2.375,1.51 0.24,0.167 10 false A 0.302,1.656 0.448,1.833 0.146,0.177 10 false B 0.677,1.656 0.823,1.833 0.146,0.177 10 false B 2.177,2.552 2.323,2.729 0.146,0.177 10 false C 2.177,2.938 2.323,3.115 0.146,0.177 10 false C 2.99,2.25 3.135,2.427 0.146,0.177 10 false D 3.396,2.24 3.542,2.417 0.146,0.177 10 false D 3.875,0.333 4.208,0.5 0.333,0.167 10 false A-A 5.615,0.333 5.948,0.5 0.333,0.167 10 false B-B 3.885,2.125 4.219,2.292 0.333,0.167 10 false C-C 5.615,2.115 5.948,2.281 0.333,0.167 10 false D-D 4.417,1.458 4.656,1.625 0.24,0.167 10 false *b 6.135,1.458 6.375,1.625 0.24,0.167 10 false *b 4.281,3.229 4.521,3.396 0.24,0.167 10 false *b 5.813,3.198 6.052,3.365 0.24,0.167 10 false *b

Text in Illustration
*a Back Side *b Adhesive Center
V100155

Adhesive - -



g.

Install the rear side front window glass LH to the vehicle body.


h.

Using suction cups, attach the 4 side window glass spacers and install the rear side front window glass LH.

i.
B474358

for Long Body:


ii.
B474363

for Standard Body:



i.

Press it in gently along the rim.

NOTICE:
·

Check that the spacers, retainers are attached to the vehicle body correctly.

·

Check that the vehicle body and glass have a small gap between them.



HINT:

Press the glass with force of 98 N (10 kgf, 22.0 lbf) or more.



j.

Using a scraper, remove any excess or protruding adhesive.

NOTICE:

Apply adhesive to the glass rim.



Hide 2.INSTALL INSPECT FOR LEAKS AND REPAIR

a.

After the adhesive has hardened, apply water from the outside of the vehicle. Check that no water leaks into the cabin.


b.

If water leaks into the cabin, allow the water to dry and add adhesive.


c.

Remove the protective tape.


Hide 62451E 3.INSTALL REAR ROOF SIDE RAIL GARNISH (w/o Rear Air Duct)

Hide 62431F 4.INSTALL ROOF SIDE RAIL GARNISH (for Long Body, w/o Rear Air Duct)

Hide 62452B 5.INSTALL NO. 3 ROOF SIDE RAIL GARNISH LH (w/o Rear Air Duct)

Hide 63372G 6.INSTALL NO. 4 ROOF BOARD SET MOULDING (w/o Rear Air Duct)

Hide 63378C 7.INSTALL NO. 3 ROOF HEADLINING MOULDING (w/o Rear Air Duct)

Hide 63377C 8.INSTALL NO. 2 ROOF HEADLINING MOULDING (w/o Rear Air Duct)

Hide 62452C 9.INSTALL REAR ROOF SIDE RAIL GARNISH LH (w/o Rear Air Duct)

Hide 63372A 10.INSTALL NO. 2 ROOF BOARD SET MOULDING (w/o Rear Air Duct)

Hide 63316A 12.INSTALL NO. 6 ROOF HEADLINING

Hide 62512R 13.INSTALL REAR BODY REAR INSIDE TRIM LH

Hide 62228 14.INSTALL LOWER QUARTER PILLAR COVER LH

Hide 62471D 15.INSTALL REAR UPPER PILLAR GARNISH RH

Hide 62472D 16.INSTALL REAR UPPER PILLAR GARNISH LH

Hide 62487A 17.INSTALL INNER ROOF SIDE GARNISH COVER RH (for Double Swing Out Type)

Hide 62488A 18.INSTALL INNER ROOF SIDE GARNISH COVER LH (for Double Swing Out Type)

Hide 63349A 19.INSTALL REAR ROOF HEADLINING GARNISH (for Double Swing Out Type)

Hide 65905B 20.INSTALL WINDOW CURTAIN RAIL SUB-ASSEMBLY (for Lift Up Type, w/ curtain)

Hide 64735A 21.INSTALL CENTER BACK RAIL INNER GARNISH (for Lift Up Type)

Hide 66301D 22.INSTALL ROPE HOOK SUB-ASSEMBLY (w/ Rope Hook)

Hide 58614A 23.INSTALL NO. 4 MAT SET PLATE

Hide 63917A 24.INSTALL NO. 3 INNER COOLER DUCT LH

Hide 63940 25.INSTALL NO. 4 INNER COOLER DUCT LH (for Long Body, w/ Rear Air Duc)

Hide 63323 26.INSTALL NO. 3 ROOF BOARD

Hide 63371B 27.INSTALL NO. 1 ROOF BOARD SET MOULDING (w/ Rear Air Duct)

Hide 65936 28.INSTALL NO. 1 CURTAIN RAIL (w/ Curtain)

Hide 65937 29.INSTALL NO. 2 CURTAIN RAIL (w/ Curtain)

Hide 63324 30.INSTALL NO. 4 ROOF BOARD (for Long Body, w/ Rear Air Duc)

Hide 63372F 31.INSTALL NO. 3 ROOF BOARD SET MOULDING (w/ Rear Air Duct)

Hide 63372A 32.INSTALL NO. 2 ROOF BOARD SET MOULDING (w/ Rear Air Duct)

Hide 33.INSTALL ROOM RACK ASSEMBLY (w/ Room Rack)

Hide 45619K 34.INSTALL KNUCKLE STOPPER COVER (w/ Room Rack)

Hide 35.INSTALL REAR SEAT ASSEMBLY (for Rear End)