Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM
RM2850E _56 Audio / Visual / Telematics _073196 AUDIO / VIDEO _0356891 AUDIO AND VISUAL SYSTEM T

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.



Panel Switch Function
Symptom Suspected Area See page
Pressing power switch does not turn on system Proceed to "Pressing Power Switch does not Turn on System" (Click here)
Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio receiver assembly (Click here)
Panel switch does not function Radio receiver assembly (Click here)
Radio receiver does not illuminate at night Proceed to "Illumination Circuit" (Click here)
Radio receiver assembly (Click here)

General Audio Function
Symptom Suspected Area See page
No sound can be heard from speakers (audio is mute) Proceed to "Radio Receiver Power Source Circuit" (Click here)
Proceed to "No Sound can be Heard from Speakers" (Click here)
Proceed to "Speaker Circuit" (Click here)
Radio receiver assembly (Click here)
Sound quality is bad in all modes (volume is too low) Proceed to "Poor Sound Quality in All Modes (Low Volume)" (Click here)
Proceed to "Speaker Circuit" (Click here)
Radio receiver assembly (Click here)
Abnormal noise occurs Check that the noise is not due to the following causes:
·

Generator

·

Blower motor

·

Horn

·

Flasher

·

Washer

·

Wiper

·

Stop light switch


-
Speaker installation condition -
Speaker cone paper breakage -
Foreign object in speakers -
Radio receiver assembly (Click here)

FM or AM Radio Function
Symptom Suspected Area See page
Radio broadcast cannot be received or poor reception Proceed to "Radio Broadcast cannot be Received (Bad Reception)" (Click here)
Radio broadcast can be received but radio station cannot be displayed (some radio stations do not provide their name information) Radio receiver assembly (Click here)
Radio broadcast can be displayed but radio broadcast cannot be heard from speakers Operate the volume switch and turn up the volume level -
Radio receiver assembly (Click here)

CD Player Function
Symptom Suspected Area See page
CD cannot be inserted/played or CD is ejected right after insertion Proceed to "Radio Receiver Power Source Circuit" (Click here)
Proceed to "CD cannot be Inserted/ Played or CD is Ejected Right After Insertion" (Click here)
CD cannot be played or player does not function with disc Proceed to "CD Player Outline" in System Description and check if the CD is compatible with the CD player -
Radio receiver assembly (Click here)
CD cannot be ejected Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio receiver assembly (Click here)
Sound quality is bad only when CD is played (volume is too low) Proceed to "Sound Quality is Bad Only when CD is Played (Volume is Too Low)" (Click here)
CD sound skips Proceed to "CD Sound Skips" (Click here)

AUX (Stereo Jack) Function
Symptom Suspected Area See page
External device sound cannot be heard or sound quality is bad (stereo jack is used) Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio receiver assembly (Click here)
The amplifier microphone assembly is inserted into the AUX terminal but no audio is output (w/ Microphone Amplifier) The amplifier microphone assembly cannot be used even when inserted into the AUX terminal. Explain to the customer that in order to use the amplifier microphone assembly, it must first be inserted into the microphone amplifier assembly -

USB Audio System Function
Symptom Suspected Area See page
USB audio system sound cannot be heard or sound quality is bad (USB connector is used) Proceed to [USB device or "iPod"] in System Description (Click here)
Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio receiver assembly (Click here)
USB device or "iPod" is not recognized Proceed to [USB device or "iPod"] in System Description (Click here)
Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio receiver assembly (Click here)
Track information, such as track, artist and album names, is not displayed Proceed to [USB device or "iPod"] in System Description (Click here)
Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio receiver assembly (Click here)
USB device or "iPod" is recognized but cannot play, or can play but not in a sorted order Proceed to [USB device or "iPod"] in System Description (Click here)
Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio receiver assembly (Click here)
iPod" battery cannot be charged Proceed to [USB device or "iPod"] in System Description (Click here)
Proceed to "Radio Receiver Power Source Circuit" (Click here)
Radio receiver assembly (Click here)

Microphone Amplifier System Function (w/ Microphone Amplifier)
Symptom Suspected Area See page
Microphone amplifier system sound cannot be heard (audio system sound can be heard) Amplifier microphone assembly (Click here)
Microphone amplifier assembly (Click here)