| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P1251 | Actual turbocharger pressure is deviated 40 kPa (300 mmHg, 11.8 in.Hg) or more from the simulated target pressure for 0.5 seconds (1 trip detection logic). | ·
Turbocharger sub-assembly ·
ECM |
After replacing the ECM, the new ECM needs registration (Click hereEngine / Hybrid System>N04C-VL (ENGINE CONTROL)>ECD SYSTEM>REGISTRATION) and initialization (Click hereEngine / Hybrid System>N04C-VL (ENGINE CONTROL)>ECD SYSTEM>INITIALIZATION).
Read freeze frame data using the GTS. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or not, as well as other data recorded at the time of a malfunction.
Check the intake and exhaust systems modifications.
No modifications.
Check that the intake and exhaust systems are not clogged.
Intake and exhaust systems are not clogged.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check the connection of the vacuum hoses to the vacuum sensor.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Inspect the turbocharger sub-assembly (Click hereEngine / Hybrid System>N04C-VL (INTAKE)>TURBOCHARGER>INSPECTION).
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Inspect the vacuum sensor (Click hereEngine / Hybrid System>N04C-VL (INTAKE)>INTAKE SYSTEM>ON-VEHICLE INSPECTION).
| Proceed to |
|---|
| OK |
| NG |
OK
NG