Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81150
1.INSTALL HEADLIGHT ASSEMBLY
Connect each connector.
Engage the claw.
Install the headlight assembly with the 3 screws.
2.INSTALL FRONT BUMPER ASSEMBLY
for Sport Package: (See page Vehicle Interior>EXTERIOR>FRONT BUMPER(for Sport Package)>INSTALLATION)
for Standard: (See page Vehicle Interior>EXTERIOR>FRONT BUMPER(for Standard)>INSTALLATION)
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ AFS)
4.PERFORM INITIALIZATION (w/ AFS)
Perform initialization (see page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
5.ADJUST HEADLIGHT AIMING
Adjust headlight aiming (see page Vehicle Interior>LIGHTING>HEADLIGHT ASSEMBLY(except LED Headlight)>ADJUSTMENT).
6.ADJUST FOG LIGHT AIMING
Adjust fog light aiming (See page Vehicle Interior>LIGHTING>FOG LIGHT ASSEMBLY>ADJUSTMENT).