Home › Vehicle Interior › LIGHTING › AFS OFF SWITCH › from 2016.05
RM24M0E _58 Vehicle Interior _059564 LIGHTING _0291954 AFS OFF SWITCH A

LIGHTING  AFS OFF SWITCH  INSTALLATION  


PROCEDURE

Hide 84155 1.INSTALL AFS OFF SWITCH (for LHD)

a.

Engage the 2 claws to install the AFS off switch.


Hide 55432B 2.INSTALL INSTRUMENT PANEL FINISH PANEL LOWER (for LHD)

Hide 55432B 3.INSTALL INSTRUMENT PANEL FINISH PANEL LOWER (for LHD)

Hide 55606 4.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)

Hide 62112 5.INSTALL COWL SIDE TRIM BOARD LH (for LHD)

Hide 67914B 6.INSTALL FRONT DOOR SCUFF PLATE LH (for LHD)

Hide 84970 7.INSTALL AFS OFF SWITCH (COMBINATION SWITCH ASSEMBLY) (for RHD)

a.

Engage the 2 claws to install the AFS off switch (combination switch assembly).


Hide 55041B 9.INSTALL NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY (for LHD)

Hide 55041B 10.INSTALL NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY (for RHD)

Hide 55650 11.INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY (for LHD)

Hide 55522B 12.INSTALL RADIO TUNER OPENING COVER (w/o Radio Receiver)

Hide 13.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)

Hide 14.INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type)

Hide 55414A 15.INSTALL INSTRUMENT CLUSTER FINISH PANEL END (w/o Navigation System)

Hide 55420A 16.INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER ASSEMBLY (for LHD)

Hide 17.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for RHD)

Hide 19.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).