Home › Vehicle Interior › LIGHTING › HEADLIGHT LEVELING ECU › from 2016.05
RM24M0E _58 Vehicle Interior _059564 LIGHTING _0291966 HEADLIGHT LEVELING ECU A

LIGHTING  HEADLIGHT LEVELING ECU  INSTALLATION  


PROCEDURE

Hide 89960 1.INSTALL HEADLIGHT LEVELING ECU ASSEMBLY

a.

Connect the connector.


b.

Install the headlight leveling ECU assembly with the 2 nuts.


Hide 88650E 2.INSTALL NO. 1 AIR CONDITIONING AMPLIFIER ASSEMBLY

a.

Install the No. 1 air conditioning amplifier assembly with the 2 screws.


b.

Connect each connector.


c.
E216458

Connect the passenger side junction block assembly with the bolt and nut.


d.

Connect each connector.


e.

Engage the 2 clamps.


Hide 55550 3.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

Hide 55607 4.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 62112 5.INSTALL COWL SIDE TRIM BOARD LH

Hide 67914B 6.INSTALL FRONT DOOR SCUFF PLATE LH

Hide 7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).