Home › Vehicle Interior › AIR CONDITIONING › BLOWER UNIT › from 2016.05
RM24M0E _58 Vehicle Interior _059584 AIR CONDITIONING _0292181 BLOWER UNIT A

AIR CONDITIONING  BLOWER UNIT  INSTALLATION  


PROCEDURE

Hide 87130D 1.INSTALL BLOWER UNIT ASSEMBLY

a.

Install the blower unit assembly with the 2 screws.


b.

w/ PTC Heater:

i.

Engage the clamp.


ii.

Install the screw.



c.

Connect the connector.


Hide 2.INSTALL AIR CONDITIONING UNIT ASSEMBLY

a.

Install the air conditioning unit assembly (See page Vehicle Interior>AIR CONDITIONING>FRONT COOLING UNIT>INSTALLATION).


Hide 55312 3.INSTALL LOWER INSTRUMENT PANEL

a.

Install the lower instrument panel (See page Vehicle Interior>INTERIOR PANEL>LOWER INSTRUMENT PANEL>INSTALLATION).


Hide 55301 4.INSTALL UPPER INSTRUMENT PANEL

a.

Install the upper instrument panel (See page Vehicle Interior>INTERIOR PANEL>UPPER INSTRUMENT PANEL>INSTALLATION).


Hide 5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 6.PERFORM INITIALIZATION

a.

Perform initialization (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable to the negative (-) battery terminal.



Hide 7.CHECK SRS WARNING LIGHT