Home › Engine / Hybrid System › 2GR-FE ENGINE MECHANICAL › ENGINE UNIT › 2013.12–2016.11
RM3160E _51 Engine / Hybrid System _019663 2GR-FE ENGINE MECHANICAL _0109583 ENGINE UNIT A

2GR-FE ENGINE MECHANICAL  ENGINE UNIT  REMOVAL  


PROCEDURE

Hide 27020 1.REMOVE GENERATOR ASSEMBLY

Hide 22267A 3.REMOVE THROTTLE BODY BRACKET

a.
A254363

Remove the bolt and throttle body bracket from the engine assembly.


Hide 17125 4.REMOVE NO. 1 SURGE TANK STAY

a.
A206488

Remove the bolt and No. 1 surge tank stay from the engine assembly.


Hide 17104 6.REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH (TWC: Front Catalyst)

Hide 17173 7.REMOVE EXHAUST MANIFOLD TO HEAD GASKET

Hide 12142 8.REMOVE NO. 2 ENGINE OIL LEVEL DIPSTICK GUIDE

a.
A202567

Remove the engine oil level dipstick.


b.

Remove the bolt and No. 2 engine oil level dipstick guide.


c.
A254364

Remove the O-ring from the No. 2 engine oil level dipstick guide.


Hide 17168 9.REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

Hide 17105 11.REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY LH (TWC: Front Catalyst)

Hide 17173A 12.REMOVE EXHAUST MANIFOLD TO HEAD GASKET LH

Hide 12315A 13.REMOVE ENGINE MOUNTING BRACKET RH

a.
A129642

Remove the 3 bolts and engine mounting bracket RH.


Hide 12321A 14.REMOVE REAR ENGINE MOUNTING BRACKET

a.
A315757C02
0.073,0.063 0.458,0.344 0.385,0.281 12 false *A 0.094,2.375 0.51,2.698 0.417,0.323 12 false *B
*A for 2WD
*B for 4WD


Remove the 3 bolts and rear engine mounting bracket.


Hide 16620 15.REMOVE V-RIBBED BELT TENSIONER ASSEMBLY

a.
A129644

Remove the 5 bolts and V-ribbed belt tensioner assembly.


Hide 11322F 16.REMOVE NO. 2 TIMING GEAR COVER

a.
A206492

Remove the 2 bolts and No. 2 timing gear cover.


Hide 16173 17.REMOVE WATER PUMP PULLEY

a.
A226686N03
2.563,0.865 2.063,0.521 false 1.75,0.438 2.052,0.594 0.302,0.156 10 false SST

Using SST, hold the water pump pulley.

SST
09960-10010  (09962-01000, 09963-00700)


b.

Remove the 4 bolts and water pump pulley.


Hide 16604 18.REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY

a.
A206493

Remove the bolt, No. 2 idler pulley cover plate, No. 2 idler pulley sub-assembly and idler pulley cover plate.


Hide 25860A 19.REMOVE NO. 1 VACUUM SWITCHING VALVE

a.
A206494

Remove the bolt and No. 1 vacuum switching valve.


Hide 83530 20.REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY

Hide 89615 21.REMOVE KNOCK CONTROL SENSOR

Hide 82219A 22.REMOVE KNOCK CONTROL SENSOR WIRE

a.
A254366

Disengage the 3 clamps and remove the knock sensor wire from the engine assembly.


Hide 89422 23.REMOVE ENGINE COOLANT TEMPERATURE SENSOR