| "Check PCS system" is displayed
|
Combination meter assembly
|
|
| Driving support ECU assembly
|
|
| "PCS temporarily not available" is displayed
|
System determines millimeter wave radar sensor assembly cannot detect obstacles due to bad weather. If weather recovers, normal control returns. (Bad weather history can be checked using Data List.)
|
|
| Millimeter wave radar sensor assembly
|
|
| Driving support ECU assembly
|
|
| Although there is possibility of collision, pre-collision control (all front collision controls) does not operate ("PCS temporarily not available" is not displayed)
|
Vehicle condition/environment does not match pre-crash safety control operation conditions (Confirm control operation conditions)
|
|
| Check installation condition of millimeter wave radar sensor assembly
|
|
| Perform millimeter wave radar sensor assembly adjustment
|
|
| Millimeter wave radar sensor assembly
|
|
| Driving support ECU assembly
|
|
| Although there is no possibility of collision, pre-collision controls (all front crash controls) operate
|
Vehicle condition/environment does not match pre-crash safety control operation conditions (Confirm control operation conditions)
|
|
| Check installation condition of millimeter wave radar sensor assembly
|
|
| Perform millimeter wave radar sensor assembly adjustment
|
|
| Millimeter wave radar sensor assembly
|
|
| Driving support ECU assembly
|
|
| Neither normal system code nor DTCs are output
|
Power source circuit
|
|
| Driving support ECU assembly
|
|
| System does not operate normally even when normal system code is output or DTCs are not output
|
Power source circuit
|
|
| Driving support ECU assembly
|
|
| Pre-crash safety system does not operate
|
Pre-crash safety system cancel switch assembly
|
|
| Pre-crash safety system cancel switch circuit
|
|
| Driving support ECU assembly
|
|
| Pre-crash safety system cannot be canceled (PCS warning light does not illuminate)
|
Combination meter assembly (Check if indicator illuminates using Active Test)
|
|
| Pre-crash safety system cancel switch circuit
|
|
| Driving support ECU assembly
|
|
| Combination meter assembly
|
|
| Pre-crash safety brake assist and pre-crash safety brake control cannot be canceled (PCS warning indicator does not illuminate)
|
Combination meter assembly (Check if indicator illuminates using Active Test)
|
|
| VSC OFF switch circuit
|
|
| Driving support ECU assembly
|
|
| Combination meter assembly
|
|